Iron 421 ET 255 Dyno Results, what's wrong with it?
#41
10 Second Club + 14 Second Truck Club
Thread Starter
iTrader: (3)
Join Date: Nov 2003
Location: Ne Pa
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mikey
Glenn, check the wipe across the valve tip please. Make sure your geometry is correct.
just got back from taking it for a ride, still feels like you turn the key off when it hits 6300 rpm.
guess it's time to change the springs and see if that fixes it.
#47
10 Second Club + 14 Second Truck Club
Thread Starter
iTrader: (3)
Join Date: Nov 2003
Location: Ne Pa
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
sorry for not updating the situation guys. i changed the valve springs and have not gotten to re dyno or run the car at the track since.
before the springs the car went 11.8 @ 122 shortshifting at 6300 and a 1.95 60' time. 10's are definetly in the future. i hope to get to the track next weekend to test it out.
i will post up an update as soon as i have some info.
before the springs the car went 11.8 @ 122 shortshifting at 6300 and a 1.95 60' time. 10's are definetly in the future. i hope to get to the track next weekend to test it out.
i will post up an update as soon as i have some info.