Mustang Dyno results
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 120
Likes: 0
From: Marysville,OH
Mustang Dyno results My car has a custom comp cam that was in it when I bought it.I thought I would try to post the dyno sheet here.It pulls strong and smooth all the way to the top.I am a little new to reading dynos.See if I can post them here.
Is that an old sheet or what. AP Engineering has been gone for a few years. Does that say 2003?
Anyways, that graph looks good to me. Most head/cam cars put that down at APE. I've seen less too.
Where do you live at?
Anyways, that graph looks good to me. Most head/cam cars put that down at APE. I've seen less too.
Where do you live at?
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 120
Likes: 0
From: Marysville,OH
Yep,LOL. I thought some of you might get a kick out of seeing this.I am in Ohio. It has great street manners and seems to be very strong.I bought it with the head and cam already done by them.I though about getting another dyno done on a dyno jet just for kicks but right now I have no problems with the running. I know alot of guys had problems with not getting their work done or completed. My car must have been one of the lucky ones. LOL! Can someone post it if I emailed the pictures to you, can someone post them better. Picture posting not my strong area.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 120
Likes: 0
From: Marysville,OH
[QUOTE=mike c.]2FSTWS6-my 346ci made 463hp 414tq on that same dyno.[/QUOTE
OK , go on I think you left out your set up.I basically have a cam and factory heads that have been worked over.
OK , go on I think you left out your set up.I basically have a cam and factory heads that have been worked over.
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 120
Likes: 0
From: Marysville,OH
See if these are better pics.They are darker and better quality but still to small,LOL o well. I give up for now still learning my program.
Last edited by 2fstws6; Apr 24, 2007 at 05:18 PM.
yah that dyno, dynos pretty low. Also had my car on their dyno and should be getting back on there in a couple of weeks. Ive definately seen a lot of cars dyno in that range and several that have done less. I think i might get a couple pulls on a local dyno jet after i get it tuned again on the mustang to see what the difference is.
Originally Posted by Jefro6996
yah that dyno, dynos pretty low. Also had my car on their dyno and should be getting back on there in a couple of weeks. Ive definately seen a lot of cars dyno in that range and several that have done less. I think i might get a couple pulls on a local dyno jet after i get it tuned again on the mustang to see what the difference is.
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Originally Posted by Jefro6996
yah that dyno, dynos pretty low. Also had my car on their dyno and should be getting back on there in a couple of weeks. Ive definately seen a lot of cars dyno in that range and several that have done less. I think i might get a couple pulls on a local dyno jet after i get it tuned again on the mustang to see what the difference is.
Sounds like a pretty stout setup you have there.
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Originally Posted by WHPLASH
Cool Jeff. I'm going too in two weeks. I heard you put in a new cam. Whats the specs on this one?
Ya sure do. thanks for the complements. i could only hope to put down numbers like your car.
The cam is the MS4 that i had ground on a 110lsa with 4 degrees advance. I couldnt resist doing it since i added the fast 90/90 and injectors since i had to have it tuned again. So the specs are 239/242 .649/.609 110+4.
i ordered the cam on the 16th and it still hasnt been ground yet so who knows how much longer it is going to take. I got bored and already took everything off down to the front cover so im just waiting on the cam to swap and then call kirk for a tune.
The cam is the MS4 that i had ground on a 110lsa with 4 degrees advance. I couldnt resist doing it since i added the fast 90/90 and injectors since i had to have it tuned again. So the specs are 239/242 .649/.609 110+4.
i ordered the cam on the 16th and it still hasnt been ground yet so who knows how much longer it is going to take. I got bored and already took everything off down to the front cover so im just waiting on the cam to swap and then call kirk for a tune.
Last edited by Jefro6996; Apr 26, 2007 at 10:28 PM.
Damn bro, and you haven't had me over during the breakdown for ??? Just giving you ****. Man thats a pretty high lift (big cam). Hope you break into the 11's this year. Not doubt about it!!!
Doug, he'll fit in just fine. Get the video camera.
Doug, he'll fit in just fine. Get the video camera.
Yah the cams pretty big but i still have stock .060 gaskets and the -2cc diamond pistons so theres plenty of room. i actually drove it around on tuesday and thought the cam was comming this week, so i tore everything apart. But i called tsp today and they said it hasnt even been ground yet. Just gives me more time to save up for some nitrous. Be sure to get some video clips of you dyno runs. When are you going?