Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

estimated horse after tune should be????

Thread Tools
 
Search this Thread
 
Old 12-15-2007 | 02:59 AM
  #1  
98TAbodnar89's Avatar
Thread Starter
Teching In
 
Joined: Jul 2007
Posts: 23
Likes: 0
Default estimated horse after tune should be????

i swaped my ls1 for the ls6 after a rod knock. i did slp cold air intake, f.a.s.t. throttle body and intake manifold. it has the zo6 heads and the slightly bigger cam. and keep in mind this motor puts out 400 from factory in car according to gm
Old 01-03-2008 | 07:20 PM
  #2  
Asmodeus's Avatar
Banned
 
Joined: Apr 2006
Posts: 1,875
Likes: 1
From: Naperville, IL
Default

Should probably make 390 or so at the wheels.
Old 01-03-2008 | 07:25 PM
  #3  
jessedale98's Avatar
11 Second Club
iTrader: (16)
 
Joined: Jan 2005
Posts: 861
Likes: 0
From: Southern Oklahoma
Default

390rwhp? doubt it.

Gm rates them at flywheel HP. Heres how I look at it, the 02' ls1 is rated at 350hp and I dyno'd 298-302rwhp. so you'll probly make 365rwhp (with your mods). I could be really wrong, but thats my guess.
Old 01-03-2008 | 11:16 PM
  #4  
Asmodeus's Avatar
Banned
 
Joined: Apr 2006
Posts: 1,875
Likes: 1
From: Naperville, IL
Default

Originally Posted by jessedale98
390rwhp? doubt it.

Gm rates them at flywheel HP. Heres how I look at it, the 02' ls1 is rated at 350hp and I dyno'd 298-302rwhp. so you'll probly make 365rwhp (with your mods). I could be really wrong, but thats my guess.
Ah, when he said slightly bigger cam, I thought he meant slightly bigger than an LS6 cam. I reread it, and it's probably just an LS6 cam. He does say he has a FAST intake and headers in his sig, but he doesn't say if they are longtubes, he MIGHT hit 380-390 if he's an M6, 350 if he's an auto.

But he will clearly fall WAY WAY short of the 480-510 he is estimating/claiming in his sig.
Old 01-08-2008 | 04:27 PM
  #5  
smg267's Avatar
TECH Resident
iTrader: (23)
 
Joined: Apr 2006
Posts: 986
Likes: 1
From: PA
Default

Originally Posted by Asmodeus
Ah, when he said slightly bigger cam, I thought he meant slightly bigger than an LS6 cam. I reread it, and it's probably just an LS6 cam. He does say he has a FAST intake and headers in his sig, but he doesn't say if they are longtubes, he MIGHT hit 380-390 if he's an M6, 350 if he's an auto.

But he will clearly fall WAY WAY short of the 480-510 he is estimating/claiming in his sig.
see that is where you are wrong you are forgetting he has the slp flow pac!!

ram air thing is good for like 15, Lid is another 15 , the bellow is 5, If he had SLP headers 65, HAHAHAH!
Old 01-08-2008 | 04:51 PM
  #6  
'Trust''s Avatar
10 Second Club

iTrader: (24)
 
Joined: Aug 2004
Posts: 7,972
Likes: 3
From: Eternity
Default

No where close to 480 - 510 even BHP, although it will probably do about 370 if he is a 6 speed, not much more. FAST intakes don't help much on stockish cams
Old 01-08-2008 | 05:17 PM
  #7  
Stang's Bane's Avatar
TECH Addict
iTrader: (22)
 
Joined: Aug 2005
Posts: 2,649
Likes: 1
From: Mont Belvieu, TX
Default

STB is worth at least 15-20 rwhp. LOL
Old 01-08-2008 | 07:04 PM
  #8  
Assman's Avatar
12 Second Club

iTrader: (2)
 
Joined: Feb 2007
Posts: 242
Likes: 0
From: Roy, Utah
Default

Damn! How did you figure 480-500 hp?
Old 01-08-2008 | 09:23 PM
  #9  
SlowZ28/SS's Avatar
On The Tree
iTrader: (14)
 
Joined: Oct 2007
Posts: 188
Likes: 0
Default

Now now...someone might get butthurt....maybe he means flywheel hp...then again.......maybe not
Old 01-08-2008 | 09:55 PM
  #10  
Assman's Avatar
12 Second Club

iTrader: (2)
 
Joined: Feb 2007
Posts: 242
Likes: 0
From: Roy, Utah
Default

Even flywheel horsepower won't be that high...
Old 01-09-2008 | 01:43 PM
  #11  
93redBIRDman's Avatar
TECH Regular

iTrader: (9)
 
Joined: Mar 2006
Posts: 457
Likes: 0
From: Fresno, Ca
Default

I could see how he'd think 480-510hp if he also thought his car made 400hp stock. But it didnt, so ya I'd say 430 flywheel hp maybe... NOT 480-510
Old 01-09-2008 | 05:20 PM
  #12  
MawneeC5's Avatar
11 Second Club
iTrader: (12)
 
Joined: Oct 2005
Posts: 195
Likes: 0
From: Springhill, FL
Default

Originally Posted by Asmodeus

But he will clearly fall WAY WAY short of the 480-510 he is estimating/claiming in his sig.

Yea, typical waxer. You see them at the meets and ask them what the car puts out and they miraculously get 125 HP out of a muffler and a K&N.

What it puts out at the crank is completely irrelevent unless you and your buddies are all gonna pull your engines and compare them on a chassis dyno.

Ahh well, he will figure it out when the tuner shows him the dyno sheet.

heh, he had this to say in another thread. "ls6 is my call

on a good day i will run mid 10s and always have 513hp"

Just another troll....nothing to see here

Last edited by MawneeC5; 01-09-2008 at 05:26 PM.
Old 01-09-2008 | 05:58 PM
  #13  
lilbuddy1587's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: May 2004
Posts: 1,691
Likes: 0
From: Mesa, Arizona
Default



Guys...He's got an easy 450 REAR WHEEL HORSEPOWER COMBO HERE! I mean, 510 at the CRANK? WOWZERS!
Old 01-09-2008 | 07:11 PM
  #14  
93redBIRDman's Avatar
TECH Regular

iTrader: (9)
 
Joined: Mar 2006
Posts: 457
Likes: 0
From: Fresno, Ca
Default

did you not read all of the posts?? He got informative opinions and his questions have already been answered...
Old 01-09-2008 | 09:44 PM
  #15  
Assman's Avatar
12 Second Club

iTrader: (2)
 
Joined: Feb 2007
Posts: 242
Likes: 0
From: Roy, Utah
Default

Originally Posted by stevegrizzle
Ive seen multiple bolton c5 zo6's put down in the mid 380's :dunno: It's real easy to join in and kick someone when theyre down, why don't you try to inform him instead of ragging on him? Or are you guys just so lacking in self confidence that you need to put him down to make yourselves feel better?
Yup, that's my problem! Hit that one right on the head. All he would have to do is open a few other threads and do 5 minutes of research and he wouldn't of had to ask...
Old 01-10-2008 | 11:33 AM
  #16  
stevegrizzle's Avatar
TECH Enthusiast
 
Joined: Feb 2007
Posts: 650
Likes: 0
From: FL
Default

I am surprised that they taught an obviously retarded man, in Utah no less, to type. My comment wasn't directed towards you or anyone in particular, and you still took offense to it; you must be really sad bro.

What makes this site great is the free flow of info, which IMO is being hampered when people only post to **** on someone.

just my.02
Old 01-10-2008 | 12:21 PM
  #17  
lilbuddy1587's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: May 2004
Posts: 1,691
Likes: 0
From: Mesa, Arizona
Default

Originally Posted by stevegrizzle
I am surprised that they taught an obviously retarded man, in Utah no less, to type. My comment wasn't directed towards you or anyone in particular, and you still took offense to it; you must be really sad bro.

What makes this site great is the free flow of info, which IMO is being hampered when people only post to **** on someone.

just my.02
You mean kind of like the garbage you're spewing right now? Hi Pot, meet Kettle.

The great thing about this website is the 'SEARCH' feature, it actually works now and can provide even the simplest of minds an answer or answers they might be looking for.
Old 01-10-2008 | 12:43 PM
  #18  
stevegrizzle's Avatar
TECH Enthusiast
 
Joined: Feb 2007
Posts: 650
Likes: 0
From: FL
Default

This thread is so pointless, youre right.
Old 01-10-2008 | 12:46 PM
  #19  
Assman's Avatar
12 Second Club

iTrader: (2)
 
Joined: Feb 2007
Posts: 242
Likes: 0
From: Roy, Utah
Default

You mean kind of like the garbage you're spewing right now? Hi Pot, meet Kettle.
Exactly like he said it! Well said.

Lol, i'm from Utah so I must be retarded. Oh and I didn't take it personally, I just though it was hilarious so I would comment on it.
Old 01-10-2008 | 01:01 PM
  #20  
lilbuddy1587's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: May 2004
Posts: 1,691
Likes: 0
From: Mesa, Arizona
Default

Originally Posted by Assman
Exactly like he said it! Well said.

Lol, i'm from Utah so I must be retarded. Oh and I didn't take it personally, I just though it was hilarious so I would comment on it.
I'm sorry you're from/live in Utah, I was born/raised in Taylors Ville unfortunately!



All times are GMT -5. The time now is 12:50 PM.