phillypartsman

I just had my 27000 mile bone stock WS6 Dyno tuned. Stock 261.3hp @ 4950 and 300.0ftlb @ 3950. After Carolina Speed Shop(CSS) tuned it I now have 326.6hp @ 5000 and 379.4ftlb torque @ 3950 of. With the dyno sheet to prove it. Does anyone know the record for highest HP and Torque on a stock LS1? My average hp @ stock was 213.3 and torque was 263.3. After tune was 263.8 and 333.5. I am so happy to bad its raining here in Conway

phillypartsman

Here is the Dyno Sheet

2000 Tran Zam

iTrader: (2)

so your saying with a bone stock ws6 and just a tune your making 380 ft lbs of tq?

That definately has to be some type of record if its legitamate... I know some heads/cam people with a mild setup making that tq... although I dont know why you'd have 50 more tq then hp...

PewterScreaminMach

iTrader: (7)

If that's true, that's one badass factory freak you have there. The strange thing is why was it making such terrible power straight out of the factory? Are you the first owner of this car? If not, I tend to think a previous owner toyed with it. Maybe they even tried to put it back to stock before you bought it so they could sell it for more, and for this reason it wasn't tuned correctly for a stock setup.

If not, that is one strange car you have. Get it to the track!

Mcduffys

iTrader: (2)

phillypartsman

One owner; bone stock; Bell and Bell Pontiac GMC; 27000 miles with just a tune and a Flowmaster muffler.

954mula

+65 HP with only a tune. I wish I were that lucky.

EarlSS

Alot of full bolt on cammed cars dont put that much tq down...so i say take it to the track and see what it does.

ScreaminRedZ

iTrader: (3)

Something doesn't sound right here...

phillypartsman

Well I posted the dyno sheet if you look you will see next to the last run they pulled the tune out and ran bone stock. Then they put the tune back. Final numbers are what they are.....Dont hate...lol....

BadAzz96Z28

iTrader: (8)

There is no way it makes that tq being stock.

EndlessSummer85

I've heard of stock 01's-02's making that kind of hp, but not tq. Take it to the track and see what she does...

cpt_bimes

iTrader: (7)

Not a dynojet so numbers are pretty much worthless. Put it on a dyno jet like everyone else does.

PewterScreaminMach

iTrader: (7)

Get it to the track!

RealLiveMD

iTrader: (1)

Was it tuned by the same people that own the dyno because I'm thinking there's a big incentive to have a local stating he got 65hp from one of their tunes. Your car should have put down about 310-320rwhp stock.

BlackScreaminMachine

iTrader: (17)

Exactly, the before #'s for a 01 is garbage, the after #'s are out of sight....

evil02z

An Auto could have a torque converter flare that would cause a high spike on the initial hit at WOT. It's rare but not uncommon.

NHRAMAN

iTrader: (1)

That is way too low stock....and way too high with just a tune.

Demonicbird00

iTrader: (17)

BS.... not happening.....if your car dynoed 260 stock....theres something wrong. and to hit 379tq after tune is complete bs.

so your ssaying before and after w/ just a tune you gained 65.2rwhp and 79.4rwtq???? thats just obsered an not accurate

i bet the first pull had a correction fator of .80 and the "after tune" correction was 1.10

take it to he track run your possibly high 12 low 13 and we'll know its stock w/ about 310rwhp


-brandon

ScreaminRedZ

iTrader: (3)

Yeah, if those numbers are "correct" then that thing better put up some HUGE numbers at the track. Then put the tune back to stock and make some mustang GTish runs.