New Dyno sheet! :)
Very nice gains! Hows that cam feel driving around? My buddy has an MS3 in his 2000 Vette and he says he doesnt like it because of the lack of bottom end power, but I told him that it was just because he still has the 3.42's out back.
I love driving it around now. my first tune sucked and made my car a pain to drive, but now it's awesome. I can really feel the power kick in at 3,300 and once it hits that rpm it just keeps pulling 
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Now throw some afr 205's on her and watch the power go up another 35-50 rwhp. Congrats on the extra power.
Just to comment that big cams don't make lowend torque I have to say BS. I am running the g5x3 version II from LG Motorsports and make a healthy 360 rwtq at 2800 rpms.
Just to comment that big cams don't make lowend torque I have to say BS. I am running the g5x3 version II from LG Motorsports and make a healthy 360 rwtq at 2800 rpms.
I'm looking for heads but I had to get injectors because my stock ones are maxed out now. so I'm doing a fast 90 with a NW 90. injectors fuel rails and then either a plate 150 shot with a stand alone system or heads. I also need to do some internal beefing up
