How many 402's w/ over 530 rwhp?
#22
TSP 402 here fitted with ETP 215's (3.9 bore chamber), 240/244 111lsa cam, ported Fast, full bolt-ons....
524whp/497wtq with 22 degress of timing for spray, through 3.90's and an M-12 tranny(Z06). The car has gone 132 in the 1/4(102 1/8th)..
I'm quite happy with my setup!
524whp/497wtq with 22 degress of timing for spray, through 3.90's and an M-12 tranny(Z06). The car has gone 132 in the 1/4(102 1/8th)..
I'm quite happy with my setup!
#23
Here is the full setup......
TSP 402 Callies/Mahle(-12cc) internals
ETP 215's @ 59cc/Cometic .040(3.9 bore heads)
SCR 11.56/DCR 8.67
G5X4 240/244 .609/.612 111+3
Veangeance ported 90 Fast/ported LS2
EWP
Vararam/Halltec airbridge
LG pro 1-3/4 no cats B&B Bullets
Powerbond pulley
I'm currently running a nitrous tune, but only by way of timing as it is 22* at peak tq and 24* in the upper rpm's.
The car has made a best of 524whp/497wtq through 3.90's and an M-12 tranny(Z06).
My best pass to date was set at +2,500 DA.....
1.640
4.574
6.979
101.79
9.046
10.769
131.50
It has gone faster(mph), but this is my best et. I did correct this run for the DA and it came out to a 10.52 @ 134.669
Good luck to those mapping builds!
TSP 402 Callies/Mahle(-12cc) internals
ETP 215's @ 59cc/Cometic .040(3.9 bore heads)
SCR 11.56/DCR 8.67
G5X4 240/244 .609/.612 111+3
Veangeance ported 90 Fast/ported LS2
EWP
Vararam/Halltec airbridge
LG pro 1-3/4 no cats B&B Bullets
Powerbond pulley
I'm currently running a nitrous tune, but only by way of timing as it is 22* at peak tq and 24* in the upper rpm's.
The car has made a best of 524whp/497wtq through 3.90's and an M-12 tranny(Z06).
My best pass to date was set at +2,500 DA.....
1.640
4.574
6.979
101.79
9.046
10.769
131.50
It has gone faster(mph), but this is my best et. I did correct this run for the DA and it came out to a 10.52 @ 134.669
Good luck to those mapping builds!