What are mild cammed 383s putting down these days???
11-29-2008, 06:05 PM
#62
11 Second Club
iTrader: (8)
Join Date: Aug 2005
Location: Pasadena, CA
Posts: 2,451
Likes: 0
Received 0 Likes
on
0 Posts
Id like to know your setup specifically... all drivetrain (manual or auto, what rearend , etc))
and your cam specs, and heads, etc.... if you dont wanna give out this info, at least gimme a close # please, because I have a LS1 at home that I plan on rebuilding, maybe as a 382, and if you made these #s, Id love to know what you used, thanks...
what gas does it run on??
Also, lastly,, dynos can read high or low. My LS1 made 250rwhp on a badly calibrated mustang dyno when I ran 8.0s and when I made 364rwhp on a dynapack, I only ran 7.8s.... so there wasnt really a 100+rwhp difference,. more of a dyno # difference...
and your cam specs, and heads, etc.... if you dont wanna give out this info, at least gimme a close # please, because I have a LS1 at home that I plan on rebuilding, maybe as a 382, and if you made these #s, Id love to know what you used, thanks...
what gas does it run on??
Also, lastly,, dynos can read high or low. My LS1 made 250rwhp on a badly calibrated mustang dyno when I ran 8.0s and when I made 364rwhp on a dynapack, I only ran 7.8s.... so there wasnt really a 100+rwhp difference,. more of a dyno # difference...
12-03-2008, 05:34 AM
#64
TECH Apprentice
Join Date: Nov 2005
Location: ne ct summer,naples in the fall
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
tfs 215, vengeance ported fast 92, vengeance proted ls2, yella terra, vrx5 cam , fast injectors, meziere, ati underdrive, kooks 1 3/4 with 3x3 catted x pipe- bottom end a lingenfelter built 383- lunati crank, oliver rods, je pistons. 11-6 c/r- 93 pump.
12-03-2008, 10:51 PM
#65
12 Second Club
Join Date: Nov 2004
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
