What do ya think?
02-14-2009, 07:20 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Texas
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
What do ya think? I'm going to be taking the car to a dyno soon, and I am wondering if I might be able to hit 350rwhp. Mods will be 85mm ftp lid, 85mm slp maf, ported tb, hooker lt's, 3" ory, custom 3" cb with hooker aerochamber muffler and some msd wires and ngk plugs. Already have some of the mods and the rest will be done in just a couple weeks then it is off to the dyno. What do you guys think it'll make. My guess is something like 340-345 rwhp and probably 350lb ft tq. Also, how much power do you lose through an a4? I ask so I can figure a crank hp number.
02-16-2009, 02:34 PM
#5
I think you are about right at 340. Might hit 350 with some great tuning.
For some more hp for cheap might want to try underdrive pulley and cutout.Figure you should be close to 425 engine hp with those mods listed in your plans.
And loss for auto is usually placed at 20% ,15% for m6. So that is where get the 340rwhp guess from.
For some more hp for cheap might want to try underdrive pulley and cutout.Figure you should be close to 425 engine hp with those mods listed in your plans.
And loss for auto is usually placed at 20% ,15% for m6. So that is where get the 340rwhp guess from.