99z28 vs 98 Cobra with ATI
#41
If that's the case then my Mach is a 9 second car because it has a built motor.
#42
#43
99z28, run him from a dig at the track. tree the **** out of him too. a good reaction time by itself will get you a few tenths ahead. ever think of dropping the front sway bar? its 15lbs off the nose and itll aid a lil more in traction.
what was your 60' and mph on your 12.4 run?
what was your 60' and mph on your 12.4 run?
#44
#45
99z28, run him from a dig at the track. tree the **** out of him too. a good reaction time by itself will get you a few tenths ahead. ever think of dropping the front sway bar? its 15lbs off the nose and itll aid a lil more in traction.
what was your 60' and mph on your 12.4 run?
what was your 60' and mph on your 12.4 run?
Yes sway bar is off...the 12.4 run had a 1.97 60' (street tires) with a 112mph trap hitting limiter every gear. Now I have mickeys and tune is fixed...and now its shifting at 6300 instead of 6k. So the 60' should go down alot and the trap will go up quite abit also.
#46
Similar. slightly different flow rates in the heads and intake and the cams are a little different but similar power and similar performance in a car with the same weight and worse gearing. ponygt65 will come in here and put in his buck fifty and he really does know more about these cars than I do
Sorry I was late guys. LOL
basically, I think this could go either way. Either the Cobra owner will lose because of tires (if gone from a dig) or 99_Z is going to lose because the car won't be able to properly transfer the weight of his Ego.
IN general though, the nod goes to the Cobra. He needs to get some REAL rubber on that thing though. 245 is the widest cause he's still on stock rims.
#47
Rofl, plus the fact I need to remove the t tops just so I can fit my head into the car....
#49
#50
#51
#53
#55
#56
Dick. Lol
No, I was racing a single turbo supra on I10 near Casa Grand one night, I was stock (****, I just wanted to see it run lol). Me and my buddy had the T Tops off after ******* around up on Mill Ave, and left the **** off all night. Anyway, as we are racing, and he is pulling me beyond belief, it starts to sound like a ******* wind tunnel in the car, and the back end started to get floaty at around 135. All the air isn't going over the top of the car like it should, and goes straight under the hatch, and with all the air being forced back there, back end starts to generate lift. Scary **** at those speeds.
No, I was racing a single turbo supra on I10 near Casa Grand one night, I was stock (****, I just wanted to see it run lol). Me and my buddy had the T Tops off after ******* around up on Mill Ave, and left the **** off all night. Anyway, as we are racing, and he is pulling me beyond belief, it starts to sound like a ******* wind tunnel in the car, and the back end started to get floaty at around 135. All the air isn't going over the top of the car like it should, and goes straight under the hatch, and with all the air being forced back there, back end starts to generate lift. Scary **** at those speeds.
#58
I am in the process of trying to get some M/T 255's from a buddy who works at discount believe me i have heard nothing but good thinks about how much better the M/T's are.
#59
Dick. Lol
No, I was racing a single turbo supra on I10 near Casa Grand one night, I was stock (****, I just wanted to see it run lol). Me and my buddy had the T Tops off after ******* around up on Mill Ave, and left the **** off all night. Anyway, as we are racing, and he is pulling me beyond belief, it starts to sound like a ******* wind tunnel in the car, and the back end started to get floaty at around 135. All the air isn't going over the top of the car like it should, and goes straight under the hatch, and with all the air being forced back there, back end starts to generate lift. Scary **** at those speeds.
No, I was racing a single turbo supra on I10 near Casa Grand one night, I was stock (****, I just wanted to see it run lol). Me and my buddy had the T Tops off after ******* around up on Mill Ave, and left the **** off all night. Anyway, as we are racing, and he is pulling me beyond belief, it starts to sound like a ******* wind tunnel in the car, and the back end started to get floaty at around 135. All the air isn't going over the top of the car like it should, and goes straight under the hatch, and with all the air being forced back there, back end starts to generate lift. Scary **** at those speeds.
Don't have it anymore.I'm trying to be like all the cool LS1 guys so I have a twin Cam Saturn now....that's right CAM FTMFW LOL
Seriously though....I wanted to rid myself of the payment to start saving for another stang, and a family member wanted a new car....so, we swapped, they took over payments, I now have none. WOOHOO..!!!!.. hopefully be back into a stang soon....I can feel the itch to not wait for a mach though, that's my problem..and I WANT ANOTHA MACH!!!
#60
I bet it was man...NO F"ing Way I'd do that.
Don't have it anymore.I'm trying to be like all the cool LS1 guys so I have a twin Cam Saturn now....that's right CAM FTMFW LOL
Seriously though....I wanted to rid myself of the payment to start saving for another stang, and a family member wanted a new car....so, we swapped, they took over payments, I now have none. WOOHOO..!!!!.. hopefully be back into a stang soon....I can feel the itch to not wait for a mach though, that's my problem..and I WANT ANOTHA MACH!!!
Don't have it anymore.I'm trying to be like all the cool LS1 guys so I have a twin Cam Saturn now....that's right CAM FTMFW LOL
Seriously though....I wanted to rid myself of the payment to start saving for another stang, and a family member wanted a new car....so, we swapped, they took over payments, I now have none. WOOHOO..!!!!.. hopefully be back into a stang soon....I can feel the itch to not wait for a mach though, that's my problem..and I WANT ANOTHA MACH!!!
i know checkin out Mach's i should be shot. . . please kill me now
ohh and for the time being, be safe those Twin Cams are mean little monsters!