Tninl98

Figured I would take a stab and see if anyone went with a simar set up. Going with the stock 6.0 block bored .060's with Mahle pistons and eagle rods. Heads will be ls6 hand ported at a reputable shop. The cam is a custom grind comp cams, 238/242 duration with 609, 602 lift on a 112lsa hooker headers and stock ls6 intake and tb. The motor will also have a 100 shot on top of that. I think that should cover everthing thanks all!

dnkynrbk

iTrader: (34)

had the same set up with a 4l60e it ran low 10s blowing thru the converter on a 150 shot
had a ms3 cam, patriot stage 3 heads, pacesetter headers. full weight car.