Set My appointment for April 25th at Rpm motors in Santa Clarita. They are going to do my Head, Cam, Intake, Headers install and tune. I am starting this thread for fun since it's so close now!!

02 c5z06

Parts list

Flp Lontubes/cats/x-pipe
Slp Loudmouth catback
224-230 .588/.592 114 XER [B]Going to run a 228/232 .585/.595 113LSA XER
Slp Loudmouth catback
Trick flow 220's TEA port work, milled to 59cc
Yella Terra 1.7
Spin Ported fast 92 with 96mm mouth and 96mm NW throttle body
Blackwing intake
Powerbond UD pulley
Monster stg 3 light flywheel
New oil Pump
New ls7 lifters/trays
Oil catch can
SVO 30's
ALL new Bolts and gaskets

I'm getting excited!

Will post the numbers when shes done and hopefully some vids If i can get them.

Ill take a guess at. 458/417

Just picked her up made 450/412

 

480...

 

455rwhp

 

470 rwhp on Charlies dyno sounds about right for your setup. 420 tq too, great combo.

 

470whp 440wtq SAE on a dynojet

 

462rwhp

 

466/424

 

more than me

 

After some thoughts on my combo I am thinking about getting a little more aggressive cam. There are two i'm looking at. 228/232 .585/.595 113LSA XER or 230/232 .595/.585 112+4LSA cam motion. What are your guys thoughts on this possible cam change? I have postponed the install for the time being.

 

448 rwhp - 423rwtq

 

440ish

 

I would go with the 230/232 for the cam and my guess is 480/410

 

Wats the results?

 

took a couple extra to change my cam for something more aggressive.

 

What you go with for cam

 

228/232 .585/.595 113lsa xer

 

Can't wait to see the results. Did they give you a time frame of how long it would take

 

As long as there is no real issues or parts needed. Shouldn't be i have everything down to the bolt. Drop of monday morning pick up thursday/friday.

 

I'm looking forward to the results! Best of luck man, hope the numbers exceed your expectations! Get a video up of the idle/rev after you get tuned, should be a beast!

 

goes in on the 9th. will post results when there done.