Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

Turbo 408 sn95 vs TT 350z vs Supercharged C6 Z06

Thread Tools
 
Search this Thread
 
Old 04-20-2011, 02:20 PM
  #1  
On The Tree
Thread Starter
iTrader: (2)
 
TheHitman's Avatar
 
Join Date: Oct 2010
Location: Waffle Land
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
Default Turbo 408 sn95 vs TT 350z vs Supercharged C6 Z06

I just got a call and a few messages from my friends in the states. Two of my friends are looking to run each other.

On one corner is a 96 Mustang with a 408 and an 88mm turbo. He has a t-56 and is on 18" wheels wrapped in MT Drag Radials. His car made 770whp on low boost and pump gas and made 1100whp on high boost and race gas. Both dyno numbers are on a dynojet. His car also weighs about 3800lbs (full interior and a cage).

On the other corner is an 03 350z with a fully built and sleeved 3.5L VQ motor with twin 60mm turbos on E85. He has a built 6 speed trans and rear end and is also running 18" wheels wrapped in MT Drag Radials. His car made 650whp on pump gas and about 800whp on E85. His car weighs in about 3600lbs(full interior).


They both agreed that the 350z will run the Mustang on low boost from a few 60-160 rolls and a few 70-170 rolls as well as a 70 roll race against the Mustang on kill just for ***** and giggles.


The Mustang guy also called his buddy, who owns an 08 C6 Z06 to join the party. His mods are a stock LS7 with an ECS paxton 1500 supercharger at 6psi. His dyno at ECS was 730whp on the ECS dynapack dyno. He is running the stock 19" wheels on R888s. His car weighs about 3300lbs. (stock Z06 with a supercharger)


My question is from a 60 or 70 roll what do you think the results will be?




All times are GMT -5. The time now is 11:56 AM.