LS1T56FTW

iTrader: (3)

With an SLP lid, and a Borla cat-back my car ran an 8.565 at 82.56 in the 1/8th with launching the car around 3000 RPM's and getting 2.0 60's out of it.

Since then, I have added TSP LT's, and a TSP ORY. With pulling a 2.0 60', do you guys think I can run 12's in the quarter? Any ideas on the trap? DA should be pretty close to 0.

Details on the car:
-The car is still untuned (car seems to run strong though)
-The car will be full weight
-The car is an M6 car with 3.42 gears
-The car has Nitto NT555R DR's

_JB_

iTrader: (33)

Trap I'm going to say 108 max, and low 13s on street tires.

LS1T56FTW

iTrader: (3)

I forgot to mention, the car was on Nitto NT555R Drag Radials for the previous time given, and will be for the upcoming quarter mile.

Head Hunter

iTrader: (14)

I was running 8.2's to hit 12.7's in the 1/4 so you're not far off.

LS1T56FTW

iTrader: (3)

What kinda trap did you have in the 1/8th and 1/4?

Demon 383

12's are easy with those mods. Work on the 60'!

Irunelevens

This. And get an LS6 intake before you get it tuned.

LS1T56FTW

iTrader: (3)

That's the plan. Get an LS6 intake and ported TB and then get it tuned. I have been having problems finding an LS6 intake for a reasonable price that is not broken or repaired though.

Quick Sh0t xMLx

Yea you can get in the 12s without much issue. You really do need to get that 60' down though, get a set of ET Streets or some other tires that don't suck

LS1T56FTW

iTrader: (3)

The tires aren't spinning, I don't want to launch it at much higher of an RPM, as it is just a stock rear. I am basically going to run the car as is to get a baseline and then run after some more bolt-ons, maybe some 4.10s as well.

Quick Sh0t xMLx

That damn 10 bolt, launch high and hope for the best lol

180ls1

iTrader: (4)

yeah your car should have the ***** if you can 60ft it good enough.