355 h/c/i/g 6speed guess ?
#1
Teching In
Thread Starter
Join Date: May 2011
Location: Jacksonville, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
355 h/c/i/g 6speed guess ?
96 z28 camaro , 6 speed . I have no clue what she would run @ my local strip , nor do I know exact HP ? I am guessing around 400-410hp to the wheels maybe a tad less .
Here are the current mods , just idea of what I might look forward to or close hp ?
True LT4
Borded .30 over ( By Blaine's Auto in Mechanicsville, Va )
Port and Polished Heads and intake
Speed Pro Forged rotating assembly
63-08-468-8 Comp Cams XFI Camshaft, 242 / 248, .584 / .579 113 LSA
Hooker Long Tube Headers
Valve Springs good up to .625 Lift ( came with cam kit )
Retainers and locks ( cam kit )
Port and Polished Twin 58mm TB
GMPP/LT4 1.6 roller rockers ( has bowtie on them )
Tuned By PCMforLess.com
Ypipe connected to a flowmaster 80 series
Drivetrain: Borg Warner T-56 , Spec 2 Stage 2 clutch kit , Richmond 410 gears
Stock suspension and running on some crappy tires , if I were on some slicks or drag radials ?
Here are the current mods , just idea of what I might look forward to or close hp ?
True LT4
Borded .30 over ( By Blaine's Auto in Mechanicsville, Va )
Port and Polished Heads and intake
Speed Pro Forged rotating assembly
63-08-468-8 Comp Cams XFI Camshaft, 242 / 248, .584 / .579 113 LSA
Hooker Long Tube Headers
Valve Springs good up to .625 Lift ( came with cam kit )
Retainers and locks ( cam kit )
Port and Polished Twin 58mm TB
GMPP/LT4 1.6 roller rockers ( has bowtie on them )
Tuned By PCMforLess.com
Ypipe connected to a flowmaster 80 series
Drivetrain: Borg Warner T-56 , Spec 2 Stage 2 clutch kit , Richmond 410 gears
Stock suspension and running on some crappy tires , if I were on some slicks or drag radials ?
#4
TECH Regular
iTrader: (9)
Join Date: Dec 2007
Location: Ohio
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Is your name Jim swain by chance? I know a couple guys with that name here in Ohio.
THe heads I had on my LT1 were Lyod Elliot stage 3 and a custom cam from him with full bolt ons and a ported intake. It laid down 433 through a 5 speed.
THe heads I had on my LT1 were Lyod Elliot stage 3 and a custom cam from him with full bolt ons and a ported intake. It laid down 433 through a 5 speed.
#5
Teching In
Thread Starter
Join Date: May 2011
Location: Jacksonville, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
No its john swain lol .. I would like to see 400 rwhp
Trending Topics
#8
TECH Enthusiast
iTrader: (21)
Join Date: Mar 2009
Location: Sacramento Ca
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Is this a street car?! That cam looks WAY too big for your setup, thats more of a stroker cam. Your gonna have to rev the **** out of your engine to make any power. With the correct cam, 400 rwhp shouldn't be much of an issue
#9
Teching In
Thread Starter
Join Date: May 2011
Location: Jacksonville, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Ya its a street car , I heard this cam was good for this setup :/ Well it does lay some rubber and will get up pretty quick . if I change cam , I am not sure what set up to use .