Mildly Modded LS1
#1
Teching In
Thread Starter
Join Date: Dec 2011
Location: Delaware
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
car is an 00 ss vert, got my tax return and ordering parts. Going to get the following parts installed and tuned within the next few weeks:
FTP 98mm lid
85 mm MAF no screen
CAI kit
BBK manifold with 85mm tb
LS6 cam and supporting mods
pacesetters, ory, magnaflow catback
looking for just a fast reliable street car, wont see track time. Any guesses on what ill dyno and also what it would run in the 1/4? street tires for right now, not trying to put too much stress on the rear.
FTP 98mm lid
85 mm MAF no screen
CAI kit
BBK manifold with 85mm tb
LS6 cam and supporting mods
pacesetters, ory, magnaflow catback
looking for just a fast reliable street car, wont see track time. Any guesses on what ill dyno and also what it would run in the 1/4? street tires for right now, not trying to put too much stress on the rear.
#4
Teching In
Thread Starter
Join Date: Dec 2011
Location: Delaware
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok so a little change of plans, next week with everything installed the car will have:
slp lid and cai kit w descreened 85mm MAF
BBK manifold w 85 mm tb
Ls6 cam and supporting mods - valvesprings, retainers, oil pump, new timing chain
Pacesetters, catted y and magnaflow catback
asp underdrive and alternator pullies
car will be dyno tuned
would i be near 400? running stock 10 bolt, stock gears and clutch, car will be a cruising/street car only no track time being that its a vert and i dont like the look of a cage
slp lid and cai kit w descreened 85mm MAF
BBK manifold w 85 mm tb
Ls6 cam and supporting mods - valvesprings, retainers, oil pump, new timing chain
Pacesetters, catted y and magnaflow catback
asp underdrive and alternator pullies
car will be dyno tuned
would i be near 400? running stock 10 bolt, stock gears and clutch, car will be a cruising/street car only no track time being that its a vert and i dont like the look of a cage
#6
TECH Junkie
iTrader: (18)
Join Date: Aug 2005
Location: Amsterdam Ny, the good part
Posts: 3,399
Likes: 0
Received 64 Likes
on
51 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
why not just do a lid , stock maf, ls6 intake , ported tb and go with a small cam , your doing the work or paying for the cam work go bigger than stock . Talk to one of the vendors , does nt have to be a monster cam either.
#7
Teching In
Thread Starter
Join Date: Dec 2011
Location: Delaware
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
z06 cam is bigger than my stock cam correct? i want to keep the car reliable and the z06 cam was only 250 ive heard with supporting mods and tune it can add 30 rwhp by itself
Trending Topics
#10
TECH Veteran
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
M6 on a dyno jet I say around 370 uaually a full bolt on ls6 will be right around 400 in an fbody however you dont have 243 heads so that will cost you.I myself put down 370 with a crate ls6 on a mustang dyno through an a4 so with a dynojet I'd be right around 385-390...