Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

turbo fbody vs r6 and 600hp s2000?

Thread Tools
 
Search this Thread
 
Old 02-11-2013 | 12:22 AM
  #1  
slowauto's Avatar
Thread Starter
Teching In
 
Joined: May 2012
Posts: 4
Likes: 0
Default turbo fbody vs r6 and 600hp s2000?

Building a turbo fbody for some racing in my area, builds consists of

98 camaro
stock ls1 130k
on3 70mm 10-15 psi
tsp 233/239 114 lsa
t56
stock rear gear ten bolt.

shooting for 550 to the tire

2008, r6 power commander, sprockets exhaust. (thinks no car could ever touch his bike) his friends all have bikes around the same level. Cbrs , etc

2002 s2000
6262 14-18 psi
stock motor with headstuds
meth kit,

550-600 on pump

I really want to walk down the bike but not sure if ill make enough power. Ran the bike cam only and he walked away, but not as bad as I expected. As for the s2000 its just a friendly rivalry , we started building our cars at the same time, How do you guys think Ill do?
Old 02-11-2013 | 12:36 AM
  #2  
itsslow98's Avatar
TECH Senior Member

iTrader: (18)
 
Joined: Apr 2006
Posts: 6,768
Likes: 4
From: Maryland
Default

Your not gonna touch either of those guys. And that boost on a 130k mile 98' ls1 isnt gonna be very reliable.
Old 02-11-2013 | 01:00 AM
  #3  
slowauto's Avatar
Thread Starter
Teching In
 
Joined: May 2012
Posts: 4
Likes: 0
Default

You dont think so? Not really looking for it to be very reliable. I just want to have a little fun and see how far I can push this motor till It goes. I have a headstuded lq4 to put in the car afterwards.



Quick Reply: turbo fbody vs r6 and 600hp s2000?



All times are GMT -5. The time now is 12:29 AM.