1987 mustang ls1
04-23-2013, 11:22 PM
#1
Teching In
Thread Starter
Join Date: Feb 2013
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1987 mustang ls1 Just finished a ls1 swap, waiting on my pcm back from frost. Just wanted to get some guesses on what times I should expect.
1987 mustang coupe
Weight expected to be around 3000 lbs with me
98 ls1
Ls6 intake
Dynatech 1 7/8" headers
Exhaust dumped right after headers
RPM lvl 4 4l60e
Yank ss4000 stall
3.55 gear in a ford 8.8"
Frost tuning
275/50r15 et street radials on weld draglites
My local track is 1/8 mile, but guesses in both 1/8 & 1/4 would be great
DA should be around -300 to 0
1987 mustang coupe
Weight expected to be around 3000 lbs with me
98 ls1
Ls6 intake
Dynatech 1 7/8" headers
Exhaust dumped right after headers
RPM lvl 4 4l60e
Yank ss4000 stall
3.55 gear in a ford 8.8"
Frost tuning
275/50r15 et street radials on weld draglites
My local track is 1/8 mile, but guesses in both 1/8 & 1/4 would be great
DA should be around -300 to 0
05-04-2013, 07:18 AM
#5
Teching In
Thread Starter
Join Date: Feb 2013
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Went to the track last night, very happy with the results! Made 5 passes, and the times were getting better with each run. Here's my best run
60 ft. 1.6030
330 ft. 4.7030
1/8 ET. 7.3650
1/8 mph. 92.21
So should be a mid to high 11 second quarter pass. Not bad for a bolt on junkyard ls1!
60 ft. 1.6030
330 ft. 4.7030
1/8 ET. 7.3650
1/8 mph. 92.21
So should be a mid to high 11 second quarter pass. Not bad for a bolt on junkyard ls1!
