meatheadgn

iTrader: (1)

I am getting ready to fire up my new engine. Here is what I have.
Iron Block .030
-15cc Wiseco pistons
4.0 Forged crank and rods
CNC LS3 heads
Victor Jr intake with 102mm TB
1000 Cc injectors
235/240 .610"/.612" 115+6
BW S500 type turbo 88mm inlet 1.45 AR T6 flange
Truck manifolds with 2.5" SS crossover
Large Ebay front mount intercooler
Holley HP EFI

Looking to make about 15-18 pounds of boost.
Engine is in a Vega with a PG and Dana 60 with 3.73 gears. I have a PTC converter that is made for this combo. I would imagine about a 4000 stall.
The car is a four link car with 14 X 32 slicks. The car is a full tube chassis car and weighed 2030 with a iron block V6, dry sump etc. I would imagine it will weigh about 2300 to 2400 pounds when done with the turbo and iron block.

Any guess on what rwhp this will make and about what ET. I am at 4500 ft above sea level and most the time the DA is about 6500.
Thanks in advance.

meatheadgn

iTrader: (1)

Anybody with this basic combo that can give me a HP estimate?
Thanks.

Stumped1215

iTrader: (9)

Thats not a basic combo, but I'll take a crack at it lol.

950rwhp@18
8.30@168 on 18

More importantly we need some pictures! I love vegas

meatheadgn

iTrader: (1)

Thanks for the guesstimate.
Here is an engine shot that I took when I was making the down pipe this week.



Photo of car from previous owner with a iron block V6

moge11

950rwhp is my guess as well on 18psi.... and ET and mph, bout the same, depending on weight, weather, and track conditions