Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

realistic numbers/times

Thread Tools
 
Search this Thread
 
Old 07-25-2013, 07:50 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
c4ls1z28's Avatar
 
Join Date: Apr 2013
Location: Northern MN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default realistic numbers/times

Hello all,

new to the ls world. been reading alot and hoping I have a decent setup. Hoping for around 370/350 mid 12s. 98 z28/A4

ls1 intake (ls6 will come soon)
hot cam 218/228 .550 112lsa
799 heads reconditioned
1 3/4 LTs ORY
LM2
3.42s
egr/airpump delete if that matters.
ported ls6 oilpump
ls2 timing chain
Frost tune for now
street tires


no stall yet as i am waiting for this trans to let go before put one in. let me know what you think. never been to a dyno or track so it will all be new to me. Thanks

Last edited by c4ls1z28; 07-25-2013 at 08:12 PM.
Old 07-26-2013, 09:24 AM
  #2  
11 Second Club
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 22 Likes on 17 Posts

Default

You might get close to your number but probably a little lower.

Track times on a stock converter are going to be mid-high 12s depending on DA and weight I would think. Should run 11s with a converter and traction.
Old 08-01-2013, 12:30 AM
  #3  
Teching In
Thread Starter
iTrader: (1)
 
c4ls1z28's Avatar
 
Join Date: Apr 2013
Location: Northern MN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

so i went to the track today, first time ever. full weight car 3/4 tank, sub, amp. only mods on the car are cat back, and dirty K&N. temps were about 75. best i could do was,
13.688 at 103.14mph 2.18 60ft. not sure if thats good or not. but i am hoping my mods will help. I now have a baseline to work off.
Old 08-01-2013, 12:43 AM
  #4  
TECH Apprentice
iTrader: (3)
 
Skraight's Avatar
 
Join Date: Feb 2012
Posts: 305
Likes: 0
Received 0 Likes on 0 Posts
Default

What happened to the cam and other mods you posted before?
Old 08-01-2013, 01:05 AM
  #5  
Teching In
Thread Starter
iTrader: (1)
 
c4ls1z28's Avatar
 
Join Date: Apr 2013
Location: Northern MN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

my oil pump just showed up tuesday, so i didnt get a chance to install last weekend. will be doing the swap this weekend and going back to the track on the 21st.



Quick Reply: realistic numbers/times



All times are GMT -5. The time now is 05:50 PM.