First Build, what should I expect
11-04-2013, 08:17 PM
#1
Teching In
Thread Starter
Join Date: Apr 2008
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
First Build, what should I expect As stated above this is my first build and was wondering what kind of power, 1/4 mile times I should be running Thanks!!
2002 Firebird Trans Am A4
Circle D single disk 4K stall
Tick performance SNS torquemax stage 3 (235/243 .62X/.62X @111+2 LSA)
PRC LS6 2.5 heads
Supporting mods for head and cam
Lid with K&N
Longtube headers (unknown brand)
True Duals with Dynomax bullets
LS6 intake
Motive 3.73's
BFGoodrich drag radials 315's
Id guess about 3600 race weight
UMI panhard bar
Spohn swaybar
*Will be getting Bigger injectors
2002 Firebird Trans Am A4
Circle D single disk 4K stall
Tick performance SNS torquemax stage 3 (235/243 .62X/.62X @111+2 LSA)
PRC LS6 2.5 heads
Supporting mods for head and cam
Lid with K&N
Longtube headers (unknown brand)
True Duals with Dynomax bullets
LS6 intake
Motive 3.73's
BFGoodrich drag radials 315's
Id guess about 3600 race weight
UMI panhard bar
Spohn swaybar
*Will be getting Bigger injectors
11-05-2013, 01:35 PM
#2
Couple customers run 117-119mph cam only in full weight 6 spd. F-bodies with that camshaft.
With ported heads you could possibly see 3-5 mph higher. MPH in a 6 speed car can be altered by faster/slower shifting so your results very well could vary from these.
With ported heads you could possibly see 3-5 mph higher. MPH in a 6 speed car can be altered by faster/slower shifting so your results very well could vary from these.