What should I expect(Forged Ls3 TVS2300)
#1
What should I expect(Forged Ls3 TVS2300)
So I have been posting a lot of questions regarding Cam/Heads compatibility for a forged ls3 longblock. But now I gotta ask...
How much power should I expect from this combo?
Ls3 shortblock forged rods/pistons 10:1 comp
(Tsp rods/weisco pistons)
255Cc LS3 PRCs
Brian Tooley stage 3 blower cam
Tvs2300+NW102 throttle body
(2.8 inch upper pulley, rear coggs, custom 10 rib 15% overdrive accessories set up
(still unsure if I should port the tvs upper manifold and still cant find anyone who does so)
Methanol 100%.
I feel on a dynojet this will put down 700+. Any ideas what to expect?
How much power should I expect from this combo?
Ls3 shortblock forged rods/pistons 10:1 comp
(Tsp rods/weisco pistons)
255Cc LS3 PRCs
Brian Tooley stage 3 blower cam
Tvs2300+NW102 throttle body
(2.8 inch upper pulley, rear coggs, custom 10 rib 15% overdrive accessories set up
(still unsure if I should port the tvs upper manifold and still cant find anyone who does so)
Methanol 100%.
I feel on a dynojet this will put down 700+. Any ideas what to expect?
Last edited by ViceCityPerformance; 05-25-2015 at 07:57 PM.
#3
I am guessing somewhere between 15-20 psi. Its hard to tell how much boost this combo will produce with the cam, heads, and throttlebody selection.