How much hp should I be making with these mods?
06-10-2015, 10:45 PM
#1
Teching In
Thread Starter
Join Date: Apr 2014
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
How much hp should I be making with these mods? I know, I know... There are many variables to take into account, but I am just too impatient. I just want a ball park figure to look forward to. I figured if I were to ask anyone, it'd be the experts here at ls1tech. So here goes:
'02 LS1 (w/ ls6 intake)
Vengeance Racing Vindicator cam, 240/244 .605/.596 112 LSA
243 heads, stage 3 cnc by land speed development in Indianapolis, milled to 62 cc chambers. TO BE INSTALLED
Pacesetter long tube headers, tsp o/r y pipe w/ cutout, magnaflow cat back.
Z06 maf. An air lid, of course. K&n air filter, if that's worth anything. Tune by James short.
Motive 4.10 gears. I know these don't do anything for hp, but I figured they'd be worth a mention.
So guys, enlighten me. How much should i be expecting? This will all be happening in fall/winter.
'02 LS1 (w/ ls6 intake)
Vengeance Racing Vindicator cam, 240/244 .605/.596 112 LSA
243 heads, stage 3 cnc by land speed development in Indianapolis, milled to 62 cc chambers. TO BE INSTALLED
Pacesetter long tube headers, tsp o/r y pipe w/ cutout, magnaflow cat back.
Z06 maf. An air lid, of course. K&n air filter, if that's worth anything. Tune by James short.
Motive 4.10 gears. I know these don't do anything for hp, but I figured they'd be worth a mention.
So guys, enlighten me. How much should i be expecting? This will all be happening in fall/winter.
06-11-2015, 10:05 PM
#3
Teching In
Thread Starter
Join Date: Apr 2014
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Had a gentleman tell me that smaller cams with the same head combo were making 450+ to the wheels. Although I want to be realistic, would it be possible to be around that area?
