Lq4 LSA blower
04-30-2016, 01:11 AM
#1
Lq4 LSA blower What do you guys think I should make?
366ci lq4
stock crank, eagle rods, mahle 4.010 flat top +4.0cc pistons, compression ratio is about 10:1
Ls3 heads, btr .660 Springs
BTR stage 3 P.D.S cam
231/248 .617/.595 120+5
fully ported blower and snout
should be about 10-12 psi
pump gas with water meth.
mated tof a t56 and welded diff 3.55 gears and a 28×10.5R15
Any guesses? I'm hoping for 650whp when I'm all done.
366ci lq4
stock crank, eagle rods, mahle 4.010 flat top +4.0cc pistons, compression ratio is about 10:1
Ls3 heads, btr .660 Springs
BTR stage 3 P.D.S cam
231/248 .617/.595 120+5
fully ported blower and snout
should be about 10-12 psi
pump gas with water meth.
mated tof a t56 and welded diff 3.55 gears and a 28×10.5R15
Any guesses? I'm hoping for 650whp when I'm all done.
