2000 Camaro Z28 M6 **CHEAP**
2000 Camaro Z28 M6 **CHEAP** K guys i didnt think i would ever post it for sale but here it is. Just today the cars oil pressure dropped and it started making noises. I brought it to my mechanic and he says it could be something as small as needing one of the rockers replaced or could be a spun bearing. Unsure because you would need to dive into it. Car runs fine, idles fine but does have a small noise fairly noticeable above 2200rpm.
Looking to get 4K OBO
2000 Pewter m6 camaro z28
114k miles
power doors and locks/windows
T-tops
mint tan leather interior (seats are trans am seats..brand new)
New clutch
T56 (shifts perfect)
New tires
Chrome Zr1 rims
Black Berger Panel
chrome inserts
Mods:
Mac headers
mac off road y pipe with gutted cats
cutout in the y pipe
stock ss slp dual dual exhaust
slp lid
slp maf
ls6 intake
g5x3 cam w/all proper supporting valvetrain mods
stock 3.42 gears
No codes thrown at all
Was tuned at Race Proven Motorsports by Fran
I can take videos upon request but here are some pics. Some of which have racing numbers from the only time i went to the track before the cam was installed. Ran a 13.4 @ 105mph. Car ran very strong since i owned it..besides the recent issue that happened today. Only selling due to the fact that i am not mechanically inclined and also don't have money to fix the problem. Either way i am taking a loss so i might as well sell it instead of going through the hassle of fixing it, even though more than likely it might be inexpensive
The only negative: Gas gauge sometimes stays on E till you drive it for a bit. I think its the fuel sending unit.
Looking to get 4K OBO
2000 Pewter m6 camaro z28
114k miles
power doors and locks/windows
T-tops
mint tan leather interior (seats are trans am seats..brand new)
New clutch
T56 (shifts perfect)
New tires
Chrome Zr1 rims
Black Berger Panel
chrome inserts
Mods:
Mac headers
mac off road y pipe with gutted cats
cutout in the y pipe
stock ss slp dual dual exhaust
slp lid
slp maf
ls6 intake
g5x3 cam w/all proper supporting valvetrain mods
stock 3.42 gears
No codes thrown at all
Was tuned at Race Proven Motorsports by Fran
I can take videos upon request but here are some pics. Some of which have racing numbers from the only time i went to the track before the cam was installed. Ran a 13.4 @ 105mph. Car ran very strong since i owned it..besides the recent issue that happened today. Only selling due to the fact that i am not mechanically inclined and also don't have money to fix the problem. Either way i am taking a loss so i might as well sell it instead of going through the hassle of fixing it, even though more than likely it might be inexpensive
The only negative: Gas gauge sometimes stays on E till you drive it for a bit. I think its the fuel sending unit.
has the car been in any accidents? the bumper cover isn't lined up correctly. the hood gap is off in the front along with the passenger headlight and fog light not being lined up, and there are no fender emblems either?
