LS6 Long Block in VA
LS6 Long Block in VA Time to upgrade.. selling my dyno and race proven long block… Car ran a best of 6.8 on a 50 shot and 7.02 N/A on 1/8 mile in the Texas heat. 10.69 1/4 on the same 50 shot. Car put down 416 hp and 353 tq on TSP dyno with turbo 350 with a loose converter and 12 bolt. When car was a street car it made 446/403 with 6 speed through 12bolt and a stock intake. All numbers were on pump gas. Motor was in the car for about 6 months on street duty till it became race only. Motor has about 1500 miles with about 40 track passes and 15-20 dyno pulls. Motor is still in car if buyer wants to hear it. I will be pulling motor sometime in November or when a buyer steps up. I have video, dyno sheets, cam card, head flow sheet and time slips for car…
The motor is a stock displacement LS6 with the following parts. All short block parts were new when motor was built in 2008.
Gm Crank
GM rods with ARP 2k rod bolts
Diamond racing forged pistons flat tops with -4 cc valve reliefs.
Cam is the NEW version MS4 specs are 239/242/ .649/.610 111.5LSA
LS7 lifters hardened TSP pushrods.
Roll maters timing set.
All gm gaskets
Heads were used with last motor and have about 8000 miles total on them. They were cleaned up with all new seal and such in late 08.
Heads are the patriot stage 5.3l. They were ported by TSP with titanium valves. New PRC 650 springs and Harlan sharp roller rockers installed last year.
You get the long block only… NO intake, headers, accessories… I will upload N/A street tune into buyer’s PCM and make small adjustments to tune... I.E. gears, DTC and timing for nitrous.
Looking for 4,000 O.B.O for more info call/text me at 325-864-1653..
The motor is a stock displacement LS6 with the following parts. All short block parts were new when motor was built in 2008.
Gm Crank
GM rods with ARP 2k rod bolts
Diamond racing forged pistons flat tops with -4 cc valve reliefs.
Cam is the NEW version MS4 specs are 239/242/ .649/.610 111.5LSA
LS7 lifters hardened TSP pushrods.
Roll maters timing set.
All gm gaskets
Heads were used with last motor and have about 8000 miles total on them. They were cleaned up with all new seal and such in late 08.
Heads are the patriot stage 5.3l. They were ported by TSP with titanium valves. New PRC 650 springs and Harlan sharp roller rockers installed last year.
You get the long block only… NO intake, headers, accessories… I will upload N/A street tune into buyer’s PCM and make small adjustments to tune... I.E. gears, DTC and timing for nitrous.
Looking for 4,000 O.B.O for more info call/text me at 325-864-1653..
Trending Topics
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
let me know if you have any intrest in selling just the short block, no heads, cam, lifters, push rods. i could do with or without covers, oil pump timming chain.
let me know. thanks
let me know. thanks
