Welds, Yank stall, UMI
Welds, Yank stall, UMI Set of Weld Prostar wheels 15x3.5 and 15x10 w/7.5" BS, front tires are good 155R radials and rears are 325/50R15 ET Street radials that are past the wear bars and the center lines are just gone... Good for a few more passes - $700 - Do not want to split Only way I will split is just selling off the fronts... me keeping the rears...... Will trade for a set of weld Draglites in same condition....
Tick Perf "Polluter" Cam (24x/24x (.61x"/.61x") 112LSA) - NIB $330
SLP Lid - $65
Yank ST3500 converter, about 3000 miles behind a cammed 346 - $350
UMI Tubular Torque arm, red, Some PC is coming off of the rear #2206 $150
SJM ABS delete kit with Linelock, front brake lines which were cut and flared to work with this kit. you would only have to cut and flare the rear brake lines. flaring tool is included as well - $150
Aftermarket SS spoiler, painted silver had LED brake light - $175
Jegster bolt in driveshaft loop w/hardware never used, For 93-02 F body
- $30
Stock TB's with no hardware or sensors - $50 each, I have 2 98/99 models and 1 00+
Janzter ported/polished/bead blasted TB - $75
Gray 98 a pillar plastics for hardtop car - $30 for both
Located in central NJ
Tick Perf "Polluter" Cam (24x/24x (.61x"/.61x") 112LSA) - NIB $330
SLP Lid - $65
Yank ST3500 converter, about 3000 miles behind a cammed 346 - $350
UMI Tubular Torque arm, red, Some PC is coming off of the rear #2206 $150
SJM ABS delete kit with Linelock, front brake lines which were cut and flared to work with this kit. you would only have to cut and flare the rear brake lines. flaring tool is included as well - $150
Aftermarket SS spoiler, painted silver had LED brake light - $175
Jegster bolt in driveshaft loop w/hardware never used, For 93-02 F body
- $30
Stock TB's with no hardware or sensors - $50 each, I have 2 98/99 models and 1 00+
Janzter ported/polished/bead blasted TB - $75
Gray 98 a pillar plastics for hardtop car - $30 for both
Located in central NJ
Last edited by Mean87SS; Dec 13, 2010 at 07:51 PM.
