2009 QTP EFI Race series.
#42
11 Second Club
Join Date: Jun 2004
Location: Hillsborough N.J
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Barry QTP,
Just wanted to thank Barry for these fun local events@ raceway pk this is always one of my yearly Favorites for sure.
So what's this new change with a roll bar? 5 or 6 point is it still lNHRA legal to 10.00 Correct??
Just wanted to thank Barry for these fun local events@ raceway pk this is always one of my yearly Favorites for sure.
So what's this new change with a roll bar? 5 or 6 point is it still lNHRA legal to 10.00 Correct??
#43
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I looked thru my 09 book...I didn't see any changes with respect to rollbars...
required at 11.49 and good to 10.00 (as long as the floor and firewall are intact)
required at 11.49 and good to 10.00 (as long as the floor and firewall are intact)
#44
9 Second Club
Join Date: Feb 2002
Location: Tampa, FL
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
11.49 you need a bar. Either get or forever be associated with that pizza boy
#49
#52
9 Second Club
Join Date: Feb 2002
Location: Tampa, FL
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
#53
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Look again my friend
http://nhra.com/tech_specs/ETQuickRef.html
http://nhra.com/tech_specs/ETQuickRef.html
#54
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
these might help
4.5 ROLL BAR
Roll bar mandatory in all cars running 11.00 (*7.00) to 11.99 (*7.49) and in convertibles running 11.00 (*7.00) to 13.99 (*8.59), and in dune-buggy type vehicles running 12.00 (*7.50) seconds and slower. Permitted in all cars. See General Regulations 4.10, 10.6.
4.6 ROLL CAGE
Roll cage mandatory in cars running 10.99 (*6.99) or quicker, or any car exceeding 135 mph (217.2 km/h). Full bodied cars, with unaltered firewall, floor and body (from firewall rearward, wheeltubs permitted), running between 10.00 (*6.40) and 10.99 (*6.99) roll bar permitted in place of roll cage. Cars running between 7.50 (*4.50) and 9.99 (*6.39) must have chassis inspected every three-years by the ASN and have a serialised sticker affixed to cage before participation. Must conform to specs for body style used, as listed in General Regulations 4.11, 10.6.
4.5 ROLL BAR
Roll bar mandatory in all cars running 11.00 (*7.00) to 11.99 (*7.49) and in convertibles running 11.00 (*7.00) to 13.99 (*8.59), and in dune-buggy type vehicles running 12.00 (*7.50) seconds and slower. Permitted in all cars. See General Regulations 4.10, 10.6.
4.6 ROLL CAGE
Roll cage mandatory in cars running 10.99 (*6.99) or quicker, or any car exceeding 135 mph (217.2 km/h). Full bodied cars, with unaltered firewall, floor and body (from firewall rearward, wheeltubs permitted), running between 10.00 (*6.40) and 10.99 (*6.99) roll bar permitted in place of roll cage. Cars running between 7.50 (*4.50) and 9.99 (*6.39) must have chassis inspected every three-years by the ASN and have a serialised sticker affixed to cage before participation. Must conform to specs for body style used, as listed in General Regulations 4.11, 10.6.
#55
11 Second Club
iTrader: (3)
Join Date: Oct 2007
Location: Bergen Co, NJ
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is from the NHRA FAQ updated 12/19/08 and can be viewed here: http://www.nhra.com/contacts/tech_faq.html
A roll bar is required in any convertible running 13.49 seconds or quicker in the quarter mile, and in other cars beginning at 11.49. The roll bar is accepted in vehicles running as quick as 10.00 second e.t., provided the stock firewall and floorboard is intact, other than for installation of wheel tubs. The rollbar must be constructed of minimum 1 ¾ inch o.d. x .118 inch wall mild steel tubing, or 1 ¾ x .083 chrome moly tubing, and must conform to the following diagram:
If the floor and/or firewall has been modified, then a full roll cage is required beginning at a 10.99 e.t. A full roll cage is required in any vehicle running 9.99 seconds or quicker, and any vehicle running 135 mph or faster (regardless of e.t.). The roll cage must be constructed of minimum 1 5/8 o.d.x .118 mild steel tubing, or 1 5/8 x .083 chrome moly tubing, and must conform to the following diagram:
A roll bar is required in any convertible running 13.49 seconds or quicker in the quarter mile, and in other cars beginning at 11.49. The roll bar is accepted in vehicles running as quick as 10.00 second e.t., provided the stock firewall and floorboard is intact, other than for installation of wheel tubs. The rollbar must be constructed of minimum 1 ¾ inch o.d. x .118 inch wall mild steel tubing, or 1 ¾ x .083 chrome moly tubing, and must conform to the following diagram:
If the floor and/or firewall has been modified, then a full roll cage is required beginning at a 10.99 e.t. A full roll cage is required in any vehicle running 9.99 seconds or quicker, and any vehicle running 135 mph or faster (regardless of e.t.). The roll cage must be constructed of minimum 1 5/8 o.d.x .118 mild steel tubing, or 1 5/8 x .083 chrome moly tubing, and must conform to the following diagram:
#59
9 Second Club
Join Date: Feb 2002
Location: Tampa, FL
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I remember I debated when I needed the bar at 12.00 and went ahead and did it and then they dropped it to 11.50 the same winter. I was pissed. In the end though, that is probably why it runs low 10's now. (shhhhh, don't tell Melissa)
#60
9 Second Club
Join Date: Feb 2002
Location: Tampa, FL
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Raceway Park has posted their schedule folks
http://racewaypark.com/main/09events...hedule2009.pdf
Here are the QTP GM EFI dates
03/28/09
06/06/09
08/22/09
10/24/09
Get 'em ready boys and girls (did not want to leave Steve out)!!!!
http://racewaypark.com/main/09events...hedule2009.pdf
Here are the QTP GM EFI dates
03/28/09
06/06/09
08/22/09
10/24/09
Get 'em ready boys and girls (did not want to leave Steve out)!!!!