Cutout Weld
Cutout Weld Hey guy's I've been looking around forever where to get my cutout welded in. I want to do the wiring myself and all I need is the stupid weld. 90 percent of the exhaust shops I called had no idea what it even was to begin with and when I showed up at one they told me my car is too low for the lift.
I finally found a place that seemed to know what they were doing and were very helpful, until they gave me a price quote of 100$.... TO WELD IN A CUTOUT.
Someone recommend to me where the hell I can find a place that will charge me 30-40$ and have somewhat of a clue what they are doing? I am in the west chester area.
I finally found a place that seemed to know what they were doing and were very helpful, until they gave me a price quote of 100$.... TO WELD IN A CUTOUT.
Someone recommend to me where the hell I can find a place that will charge me 30-40$ and have somewhat of a clue what they are doing? I am in the west chester area.
$100 sounds about right because by the time you put in on the lift,cut/weld it properly you'll probly be an hour.So an hourly shop rate and materials could be easilly $100.
Bet you didn't think of it that way.
Bet you didn't think of it that way.
Yeah my shop rate is $94 an hour so that sounds right but some exhaust shops will do it alot cheaper.
Everyone claims to have got theirs done anywhere from 10-50 dollars, and those who payed upward of 40 were claimed to have been ripped off. Has anyone else here actually payed 100 to get theirs welded in?
i got quoted $40 by a friend of mine to do it but this was before i got my lift so im just going to do it myself. a real shop should do it for about $70-100 for one hour of time, i know if someone asked me, id say at least $50 but i also dont like working on other people's cars
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo id someone asked me to weld a cutout on their car for 50 bucks i would walk over with a grinder, clean the rear quarterpanel off and weld the cutout to the panel.
You asked for a cutout to get welded in lol.
You asked for a cutout to get welded in lol.
I found a shop that did it for 80$, more than I wanted to pay but it sounds good and he took his time to do it right. I still see threads about people not willing to pay over 60 for a cutout install all the time.
