Northeast LS3/L92 conversion - special price for 2 setups
#1
FormerVendor
Thread Starter
Northeast LS3/L92 conversion - special price for 2 setups
We have currently have the parts to do 2 LS2 conversions to a LS3/L92 top end here at Complete Street, so I'd like to offer the board a special price w/ install.
Here's what the package includes:
#821 casting LS3 heads
- performance valve job
- back cut stock valves
- hand blending of the chambers and bowls to maximize the valve job
- Performance Dual Valve Spring kit with titanium retainers
- milled .030 to keep stock compression
GM Head Gaskets
ARP head bolts
8 Intake Rockers new from GM
2 Rocker stands new from GM
.080 wall Trend hardened pushrods
Custom cam from Predator
LS3 intake with fuel rails and injectors - Ported by CSP
Your stock LS2 throttle body - Ported by CSP
New LS7 lifters installed
New LS2 timing set
Dyno results before and after the install on our Dynojet 248
Dyno tuning followed by street tuning
All labor is included for the head/ cam install and tuning.
GTO Price is $4300.....(+ sales tax if req'd)
Corvettes please add $300 for the extra labor
- If your car is low mileage and you opt to keep some of your stock items (timing chain / lifters) then we can reduce price accordingly for those parts.
Headers - we can add Kooks or Pacesetter headers to the install at same time for a good price if you don't already have them. Inquire if needed.
Cam selection - we have a cam in mind that will easily reach 440+rwhp as the basic selection (being conservative here). If you want more we can tailor something to your goals for the same price. Piston notching may be required if you want a larger stick, and will be additional $150.
Gears - pair up a set of 3.73, 3.91, or 4.10 gears with a TruTrac. We can install this at the same time and maximize your tuning $$ by setting up your speedo to match.
Of course while your car is here you can have Frank w/ Rocksand install Pedders suspension items as well.
Looking to make 2 LS2 cars a whole lot faster...so if you're interested PM or call us at the below #.
Here's what the package includes:
#821 casting LS3 heads
- performance valve job
- back cut stock valves
- hand blending of the chambers and bowls to maximize the valve job
- Performance Dual Valve Spring kit with titanium retainers
- milled .030 to keep stock compression
GM Head Gaskets
ARP head bolts
8 Intake Rockers new from GM
2 Rocker stands new from GM
.080 wall Trend hardened pushrods
Custom cam from Predator
LS3 intake with fuel rails and injectors - Ported by CSP
Your stock LS2 throttle body - Ported by CSP
New LS7 lifters installed
New LS2 timing set
Dyno results before and after the install on our Dynojet 248
Dyno tuning followed by street tuning
All labor is included for the head/ cam install and tuning.
GTO Price is $4300.....(+ sales tax if req'd)
Corvettes please add $300 for the extra labor
- If your car is low mileage and you opt to keep some of your stock items (timing chain / lifters) then we can reduce price accordingly for those parts.
Headers - we can add Kooks or Pacesetter headers to the install at same time for a good price if you don't already have them. Inquire if needed.
Cam selection - we have a cam in mind that will easily reach 440+rwhp as the basic selection (being conservative here). If you want more we can tailor something to your goals for the same price. Piston notching may be required if you want a larger stick, and will be additional $150.
Gears - pair up a set of 3.73, 3.91, or 4.10 gears with a TruTrac. We can install this at the same time and maximize your tuning $$ by setting up your speedo to match.
Of course while your car is here you can have Frank w/ Rocksand install Pedders suspension items as well.
Looking to make 2 LS2 cars a whole lot faster...so if you're interested PM or call us at the below #.
Complete Street Performance
312D Turner Lane
West Chester, PA 19380
(570) 259-2547
312D Turner Lane
West Chester, PA 19380
(570) 259-2547