estimate cost of window tinting?
-thanks
btw i loved my 5% during the day, but nightime was a total ***** to drive with lol.
Maybe some on the hatch as they do not care about that but the side windows forget about it.
I got 35% on the sides and 20% on the back. Looks good imo.
I'v had it for over 8yrs now and I'll probably be redoing it in a couple. The back is done in 2 pieces and I tore a couple spots in it. (using my car as a truck once or twice
) If you can get a shop to do the back in one piece it will look best. Trending Topics
The Best V8 Stories One Small Block at Time
Dont go with the cheapest price, as they usually use crap film. 3M is good as is Diamond.
I only know diamond is good after having it on all of my cars. Wife's car got 3M and it held up just as well. But I loved that with the Diamond Iw as able to choose the type of film(metalic,ceramic and i forget the others) that either fit my needs for heat reflection or, in my case, looked the best.
Also, just a heads up, you want to make an effort to make sure your windows are clean. Make sure they don't have any crud or glue on them or anything like that because they will charge you extra to remove it. My rear hatch window/passenger side window were all screwed up with glue residue from the old tint that I removed that I couldn't get off myself, so they charged me an extra $100 to clean them completely and get them 100% clear again.
They do a killer job on hatch tints, once piece no bubbles and defrost still functions fine. Still might look them up when I have the extra scratch.
Also, just a heads up, you want to make an effort to make sure your windows are clean. Make sure they don't have any crud or glue on them or anything like that because they will charge you extra to remove it. My rear hatch window/passenger side window were all screwed up with glue residue from the old tint that I removed that I couldn't get off myself, so they charged me an extra $100 to clean them completely and get them 100% clear again.
so ill keep that in mind. Anyone have any idea what i could use to get that stain off the inside of my window? its like a hard brown drop. i thought it was superglue so i tried acetone and nothing, i tried decreaser and nothing... so any thoughts?









