Anyone tuned by Slowhawk?
Anyone tuned by Slowhawk? To all who have been tuned by Slowhawk, don't worry I heard all but great comments about him, but my question does he do camwork or custom grinds? if so, what price range?
TECH Regular
Joined: Jul 2004
Posts: 436
Likes: 0
From: Eddington, Maine
Originally Posted by REDWS6CHICK
To all who have been tuned by Slowhawk, don't worry I heard all but great comments about him, but my question does he do camwork or custom grinds? if so, what price range?
I dont know his prices but I can tell you that he can do a cam change in his sleep and will tune it as good as anybody in New england.
He is preeeeeeeety good for a chevy guy!
He is preeeeeeeety good for a chevy guy!
Originally Posted by Fred99Z28
I think it depends on what YOU want. I mean he will put any cam in you want, but he knows what grinds work best. He doesn't grind them himself, but gets what he wants from what you tell him your looking for. I asked him for 400+ RW HP and he gave me 426, with 120 mph 1/4 mile time slips. Exactly what I asked for (mph). As far as price goes, he did me a full header, ported heads, cam ect..setup for a little more than 5K, but that was awhile ago. Cam only would be much cheaper I'm sure.-Fred
basically I have all the bolt-ons except water pump LT's, manifold, catback, lid, filter, and I was hearing that I can get 400 hp with a cam so now I am interested. I also do not want to break my rear end.
Another q is he doesn't do the grinds himself but he gets from other sponsors or shops?
TECH Regular
Joined: Jul 2004
Posts: 436
Likes: 0
From: Eddington, Maine
Originally Posted by REDWS6CHICK
basically I have all the bolt-ons except water pump LT's, manifold, catback, lid, filter, and I was hearing that I can get 400 hp with a cam so now I am interested. I also do not want to break my rear end.
Another q is he doesn't do the grinds himself but he gets from other sponsors or shops?
Another q is he doesn't do the grinds himself but he gets from other sponsors or shops?
Trending Topics
best bet is pm him with what you want power and driveabilty wise and if you just want top end , or more midrange ect. he will get it cut install it and tune it and you will be extremly happy with the car after hes done 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I pick the grind I want and Comp Cams grinds it for me 
I've tested almost every sponsor Cam out there.
There is alot more too it than looking for 400hp.We have to go over your gearing,idle quality,future mods,and drivability you are looking for.
I've tested almost every sponsor Cam out there.There is alot more too it than looking for 400hp.We have to go over your gearing,idle quality,future mods,and drivability you are looking for.
Originally Posted by Slowhawk
I pick the grind I want and Comp Cams grinds it for me I've tested almost every sponsor Cam out there.
There is alot more too it than looking for 400hp.We have to go over your gearing,idle quality,future mods,and drivability you are looking for.
I've tested almost every sponsor Cam out there.There is alot more too it than looking for 400hp.We have to go over your gearing,idle quality,future mods,and drivability you are looking for.
cool, should I just put down here my mods or PM u?