Good Luck! 
It's cleaning time.
It's cleaning time. My nephew desided it's cleaning time before things get too busy... (he is going to change over the trany in the 75) also he is putting sway bars on the Baja for me.. so I'll be loven the TA for three days.
here is what i have to work with.
here is what i have to work with.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Well it's almost 2am and i'm done with the paint. it took a little longer then i expected.. (darn real work always gets in the way) I'll get some sunny pic's in the am... till then...
You know i will tailwind...
Well I'm done.. and she passes the five foot rule. Now my nephew does take care of her but he doesn't have a garage.. so she sits under a car cover..
For polish is used
those are pad dependant to I used
the black heavy cutting and the blue polishing
from Edge 2000
I then went and finished polished to get any maring out with
with a blue polishing foam pad,
and I got lazy and used
This works great but I still feel like I cheated
I did a wipe down with
which just helped gloss it up and make sure I don't miss any spots
OK here is the finish product
thank you all.
Well I'm done.. and she passes the five foot rule. Now my nephew does take care of her but he doesn't have a garage.. so she sits under a car cover..
For polish is used
those are pad dependant to I used
the black heavy cutting and the blue polishing
from Edge 2000
I then went and finished polished to get any maring out with
with a blue polishing foam pad,
and I got lazy and used
This works great but I still feel like I cheated
I did a wipe down with
which just helped gloss it up and make sure I don't miss any spots
OK here is the finish product
thank you all.
Very nice.
Black is a pain in the *** as I learned this year when the wife got a black Saab, but it can also be very rewarding when finished.
I did the Menzerna three step process with her car (Intense polish, final polish, FMJ) and was quite happy with the results. I used a PC do do the work since it was a new car the swirls weren't bad.
Here's a pic...
If you can't tell, it's her passenger side door and that's my car in the reflection. Pretty neat pic if I say so myself.
Black is a pain in the *** as I learned this year when the wife got a black Saab, but it can also be very rewarding when finished.
I did the Menzerna three step process with her car (Intense polish, final polish, FMJ) and was quite happy with the results. I used a PC do do the work since it was a new car the swirls weren't bad.
Here's a pic...
If you can't tell, it's her passenger side door and that's my car in the reflection. Pretty neat pic if I say so myself.
Launching!
Joined: Nov 2003
Posts: 221
Likes: 0
From: Pawcatuck, CT
Bajapat: You use a PC on that?
I've heard the cut on the Optimum Compound isn't that much stronger than the polish, so it's best suited to orbital use, which works really well with it. That's why Optimum released the Hyper Compound, which is better suited for a rotary.
Nothing wrong with the spray wax, either. I don't use it, but if I needed to save a lot of time I'd pick some up.
I've heard the cut on the Optimum Compound isn't that much stronger than the polish, so it's best suited to orbital use, which works really well with it. That's why Optimum released the Hyper Compound, which is better suited for a rotary.
Nothing wrong with the spray wax, either. I don't use it, but if I needed to save a lot of time I'd pick some up.
Naw rotary.. I have a PC but I find that the rotary just works better for me..
I found the best is the polish.. neither the compound or the hyper compound works as i expected..
I found the best is the polish.. neither the compound or the hyper compound works as i expected..
