Help me pick heads?
Help me pick heads? I'm gonna bite the bullet and order heads this week.
I would like to ask you guys your opinion on 2 heads.
AFR 205's VS DART 205's? I've done sooo much homework, and want opinions from you guys/gals
I'd love ET's but they are too rich for my blood. ( The AFR's are pushing it )
So what do you guys say, give the Darts a shot for like $1,300 or go with the proven AFR's? (Futral seems to have good luck w/ the Darts)
That plus the Dart route might let me get the Fast 90 setup too.
Thanks
I would like to ask you guys your opinion on 2 heads.
AFR 205's VS DART 205's? I've done sooo much homework, and want opinions from you guys/gals
I'd love ET's but they are too rich for my blood. ( The AFR's are pushing it
)So what do you guys say, give the Darts a shot for like $1,300 or go with the proven AFR's? (Futral seems to have good luck w/ the Darts)
That plus the Dart route might let me get the Fast 90 setup too.
Thanks
Originally Posted by Big Mike
ET heads are THE premier LS1 head out there right now! Just a pain in the *** to get a pair.. I got mine though!
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by DannoWS6
Have you seen any good #'s w/ the Edlebrocks?
I haven't heard much about them.
I haven't heard much about them.
Trending Topics
It's tough with all these new heads on the market for cheap $ that are doing pretty good. I was always die hard AFR, but it looks like you can get similar #'s for heads under $1,500.
I've been racking my brain for months.
I've been racking my brain for months.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Even CNC'ed ls6's are hitting close to AFR #'s https://ls1tech.com/forums/showthrea...2&page=1&pp=20
For 1 grand.
For 1 grand.
Originally Posted by DannoWS6
Even CNC'ed ls6's are hitting close to AFR #'s https://ls1tech.com/forums/showthrea...2&page=1&pp=20
For 1 grand.
For 1 grand.
The AFR's have proven themselves to be good and consistant.
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
1500 for good heads? you mean ls1 ported ones right?
i would go afr or edlbrock. not huge money, good flow, good power and the thick deck hight is nice.
some of the cnc heads are better power wise ect, but give afr's to someone that can port them, and wow!!!
i would go afr or edlbrock. not huge money, good flow, good power and the thick deck hight is nice.
some of the cnc heads are better power wise ect, but give afr's to someone that can port them, and wow!!!
This is a tough one
I think I might give those LS6 PRC heads a try (I like their CNC program) and throw on a FAST 90 setup, I can get all that for the price of a set of AFR's approx.
I'm not looking to be a dyno queen or run low 11's NA, Just want a fun street car and 11.5's NA
AFR's are the **** but tough to justify when it comes down to it.
I think I might give those LS6 PRC heads a try (I like their CNC program) and throw on a FAST 90 setup, I can get all that for the price of a set of AFR's approx.
I'm not looking to be a dyno queen or run low 11's NA, Just want a fun street car and 11.5's NA
AFR's are the **** but tough to justify when it comes down to it.
Originally Posted by Noyzee
1500 for good heads? you mean ls1 ported ones right?
i would go afr or edlbrock. not huge money, good flow, good power and the thick deck hight is nice.
some of the cnc heads are better power wise ect, but give afr's to someone that can port them, and wow!!!
i would go afr or edlbrock. not huge money, good flow, good power and the thick deck hight is nice.
some of the cnc heads are better power wise ect, but give afr's to someone that can port them, and wow!!!
Look at this guy, out of the box Dart 205's, Pretty respectable #'s for heads that sell for $1,300
https://ls1tech.com/forums/dynamometer-results-comparisons/480231-dart-205-dyno-numbers.html
Originally Posted by Noyzee
them and afr's are compairable. im sure you will see somthing on them soon
WCCH-ELS-1
http://www.proheads.com/pricing.htm
2 G's for the 215 runners, looks promising.
Originally Posted by Noyzee
1500 for good heads? you mean ls1 ported ones right?
i would go afr or edlbrock. not huge money, good flow, good power and the thick deck hight is nice.
some of the cnc heads are better power wise ect, but give afr's to someone that can port them, and wow!!!
i would go afr or edlbrock. not huge money, good flow, good power and the thick deck hight is nice.
some of the cnc heads are better power wise ect, but give afr's to someone that can port them, and wow!!!
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by DannoWS6
I just found this from a sponser. Are these the heads you are talking about?
WCCH-ELS-1
http://www.proheads.com/pricing.htm
2 G's for the 215 runners, looks promising.
WCCH-ELS-1
http://www.proheads.com/pricing.htm
2 G's for the 215 runners, looks promising.
chef spilled the beans tho. esp did some testing, and i know another person that is waiting on a new set for his HC swap!!!!
they did pretty well
