Vette/Viper results
09-17-2006, 10:07 AM
#1
Vette/Viper results Took Brent's car.With the awesome work of Brent and Mike pitting we had a smooth day.
Ended up running
1.62 60'
6.8 at 106mph in 1/8
10.45 at 139.70mph 1/4
Car is still on a very safe tune due to the tuning problems I had the day before.We ran it 5 times and ended making it to the Semi Final on the shootout. So,some more suspension/tire work should get us a 1.4 60' and that will touch 10.0.Then add the 6-8 degree's of timing--9's easilly for a DD car
I attached the dyno graph too comparing the N/A to final blower #'s. Hopefully soon I'll have the tuning finished
Ended up running
1.62 60'
6.8 at 106mph in 1/8
10.45 at 139.70mph 1/4
Car is still on a very safe tune due to the tuning problems I had the day before.We ran it 5 times and ended making it to the Semi Final on the shootout. So,some more suspension/tire work should get us a 1.4 60' and that will touch 10.0.Then add the 6-8 degree's of timing--9's easilly for a DD car
I attached the dyno graph too comparing the N/A to final blower #'s. Hopefully soon I'll have the tuning finished
09-17-2006, 11:04 AM
#5
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
That's sick and the car's not even fully tuned yet-theres probably another 200 horse in there just waiting to be unleashed! Good job buddy! Is there any issues tuning with that intake?
09-17-2006, 11:30 AM
#7
Originally Posted by VINCE
Damn that is fast for a 6 speed. Can you tell us what you have done to the drivetrain to make it stronger?
right now it has a Z06 Tranny with a hardened output shaft,DTE stage 3 rear with 3.42's,DTE rear brace,SPEC dual disk clutch. Stock everything else.Running CCW?ET streets.
Trending Topics
09-17-2006, 11:49 AM
#8
Originally Posted by Slowhawk
We've broke everything once or twice in the last few years
right now it has a Z06 Tranny with a hardened output shaft,DTE stage 3 rear with 3.42's,DTE rear brace,SPEC dual disk clutch. Stock everything else.Running CCW?ET streets.
right now it has a Z06 Tranny with a hardened output shaft,DTE stage 3 rear with 3.42's,DTE rear brace,SPEC dual disk clutch. Stock everything else.Running CCW?ET streets.
09-17-2006, 01:56 PM
#12
TECH Enthusiast
Join Date: Aug 2003
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by badpewter-z
great results don , once that thing is dialed an and takes the more timing itll be nuts and running 9's with brent driving
09-17-2006, 02:00 PM
#13
TECH Enthusiast
Join Date: Aug 2003
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PurEvl
It was an awesome day, had alot of fun. I got torched though 
The car leaves the line awesome and it accelerates so violently
The car leaves the line awesome and it accelerates so violently
09-17-2006, 02:46 PM
#17
Originally Posted by BrentC5
Thanks for your help today Mike, I had fun. The amazing thing I thought was Don bracket racing with a 6 speed with a car he never, or almost never drives. Kudos to Don. The guy he was racing against probable has been racing the same set up for a long time. Maybe he will chime in in here. Kudos to him to. The vipers with 700 Ft Lbs tq. were out early and were running 11's. No vipers left in the semis.
It's nice to have a NA V8 F-body that is as fast as a twin turbo Viper
