Official Polk County thread!
Teching In
Joined: Aug 2010
Posts: 36
Likes: 1
From: Lakeland.FL
Registered User
Joined: Jun 2012
Posts: 0
Likes: 0
Thanks man!!
Sorry to hear about your loss, sounds like a pretty tight crew around here I'm sure you guys will get it back together.
Thanks for the welcome man, I love it down here way better then NY. One of these days I will have to come out to the track, the only thing is I never been. I set the car up for it but really just always ran it on the street.
Now that I'm getting kinda older and have a kid on the way I think I'm goin to have to start getting used to the track... These cops down here don't play and don't need no part of that. So probably see you guys out there sooner than later, but need to get a tune first....
Now that I'm getting kinda older and have a kid on the way I think I'm goin to have to start getting used to the track... These cops down here don't play and don't need no part of that. So probably see you guys out there sooner than later, but need to get a tune first.... Yeah the cops around here will follow you just to wait for you to do something wrong.
I had one follow me all around town till finally i just pulled into mcdonalds to get him off me.
Keep it on the track or you'll end up like me and have tons of tickets and pay wayyyyy to much for insurance lol.
Your car an auto?
I had one follow me all around town till finally i just pulled into mcdonalds to get him off me.
Keep it on the track or you'll end up like me and have tons of tickets and pay wayyyyy to much for insurance lol.
Your car an auto?
Registered User
Joined: Jun 2012
Posts: 0
Likes: 0
Yeah the cops around here will follow you just to wait for you to do something wrong.
I had one follow me all around town till finally i just pulled into mcdonalds to get him off me.
Keep it on the track or you'll end up like me and have tons of tickets and pay wayyyyy to much for insurance lol.
Your car an auto?
I had one follow me all around town till finally i just pulled into mcdonalds to get him off me.
Keep it on the track or you'll end up like me and have tons of tickets and pay wayyyyy to much for insurance lol.
Your car an auto?
. I need to get a driveshaft made for the th350 though then I can put it in... Yes sir I did I replied today.
Teching In
Joined: Aug 2010
Posts: 36
Likes: 1
From: Lakeland.FL
I went through that hole ticket/insurance thing about 10yrs ago cant afford that any more, that sucks. With the cops and all I was wondering how are they on noise pollution?? Uuumm I come off my longtubs to (2) borla 14" bullets to turn downs underneath the front seats?? Probably gonna have to change that.... But as far as auto, kinda I have two trannys for the car. In the car right now is t56 that has some work done to it and in the garage I have a built th350 with a full reverse manual valve body and a trans brake. I need to get a driveshaft made for the th350 though then I can put it in...
Yes sir I did I replied today.
. I need to get a driveshaft made for the th350 though then I can put it in... Yes sir I did I replied today.
Teching In
Joined: Aug 2010
Posts: 36
Likes: 1
From: Lakeland.FL
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo [QUOTE=JesterLT1;16435822]I went through that hole ticket/insurance thing about 10yrs ago cant afford that any more, that sucks. With the cops and all I was wondering how are they on noise pollution?? Uuumm I come off my longtubs to (2) borla 14" bullets to turn downs underneath the front seats?? Probably gonna have to change that.... But as far as auto, kinda I have two trannys for the car. In the car right now is t56 that has some work done to it and in the garage I have a built th350 with a full reverse manual valve body and a trans brake. I need to get a driveshaft made for the th350 though then I can put it in...
I wouldn't worry about changing it.
Just keep your foot out of it if you see a cop.
A friend of mine has longtubes straight out to quad tips on his lt1
He bought it like that.
It's loud as hell.
But on the way home from picking it up he got pulled over and the cop said that they cant do anything about it except after 10pm
I'm a t56 guy.
Both fbodies I've owned have been t56's
Lakeland driveshaft is the place to go.
. I need to get a driveshaft made for the th350 though then I can put it in... I wouldn't worry about changing it.
Just keep your foot out of it if you see a cop.
A friend of mine has longtubes straight out to quad tips on his lt1
He bought it like that.
It's loud as hell.
But on the way home from picking it up he got pulled over and the cop said that they cant do anything about it except after 10pm
I'm a t56 guy.
Both fbodies I've owned have been t56's
Lakeland driveshaft is the place to go.
Registered User
Joined: Jun 2012
Posts: 0
Likes: 0
I went through that hole ticket/insurance thing about 10yrs ago cant afford that any more, that sucks. With the cops and all I was wondering how are they on noise pollution?? Uuumm I come off my longtubs to (2) borla 14" bullets to turn downs underneath the front seats?? Probably gonna have to change that.... But as far as auto, kinda I have two trannys for the car. In the car right now is t56 that has some work done to it and in the garage I have a built th350 with a full reverse manual valve body and a trans brake. I need to get a driveshaft made for the th350 though then I can put it in...
I wouldn't worry about changing it.
Just keep your foot out of it if you see a cop.
A friend of mine has longtubes straight out to quad tips on his lt1
He bought it like that.
It's loud as hell.
But on the way home from picking it up he got pulled over and the cop said that they cant do anything about it except after 10pm
I'm a t56 guy.
Both fbodies I've owned have been t56's
Lakeland driveshaft is the place to go.
. I need to get a driveshaft made for the th350 though then I can put it in... I wouldn't worry about changing it.
Just keep your foot out of it if you see a cop.
A friend of mine has longtubes straight out to quad tips on his lt1
He bought it like that.
It's loud as hell.
But on the way home from picking it up he got pulled over and the cop said that they cant do anything about it except after 10pm
I'm a t56 guy.
Both fbodies I've owned have been t56's
Lakeland driveshaft is the place to go.
Thanks for the heads up guys and the shop advise for a driveshaft. I haven't ran the auto yet so I guess for now I'm still a t56 guy for now...
So I bought a house here in Lakeland a couple weeks ago and am finally moving in this weekend. Hopefully I will be able to get my 416 finished now that I wont be filling my gas tank 3-4 times a week driving to work from Titusville to Lakeland. That $400-500 a month in fuel I spent can now go back into the T/A. I miss my car its been down a couple years now.
So I bought a house here in Lakeland a couple weeks ago and am finally moving in this weekend. Hopefully I will be able to get my 416 finished now that I wont be filling my gas tank 3-4 times a week driving to work from Titusville to Lakeland. That $400-500 a month in fuel I spent can now go back into the T/A. I miss my car its been down a couple years now.
Registered User
Joined: Jun 2012
Posts: 0
Likes: 0
Sorry for missin yesterday guys but had a little drama in lake Alfred yesterday. So we go out to Kissimmee to baby's r us and gettin stuff for the baby and doin our normal Saturday stuff and get back to the house and in the middle of the day someone broke into the toolbox of my truck and helped themselves to about 400$ of my ****...Long story short. Wtf...
I might head out to the track this weekend comin up as a spectator to get the feel for what I need (helmet, etc..) and how it all works lol never been on or to a track lol.
I might head out to the track this weekend comin up as a spectator to get the feel for what I need (helmet, etc..) and how it all works lol never been on or to a track lol.
Registered User
Joined: Jun 2012
Posts: 0
Likes: 0
So I bought a house here in Lakeland a couple weeks ago and am finally moving in this weekend. Hopefully I will be able to get my 416 finished now that I wont be filling my gas tank 3-4 times a week driving to work from Titusville to Lakeland. That $400-500 a month in fuel I spent can now go back into the T/A. I miss my car its been down a couple years now.
Congrats on the move, I know what it's like to be without the car. I just got my car down here from ny after a year and half. You almost forget the way it pulls and how much faster then the dd it actually is (whoops that's 100mph, don't feel like it) but anyway again congrats on the move and good luck with the build and hopefully don't take to long.
Congrats on the move, I know what it's like to be without the car. I just got my car down here from ny after a year and half. You almost forget the way it pulls and how much faster then the dd it actually is (whoops that's 100mph, don't feel like it) but anyway again congrats on the move and good luck with the build and hopefully don't take to long.
160 injectors and afco's.
Soon maybe pro Efi
Anyways MIKE T/A
https://ls1tech.com/forums/parts-cla...-w-extras.html
Soon maybe pro Efi
Anyways MIKE T/A
https://ls1tech.com/forums/parts-cla...-w-extras.html
would anyone have/know anyone with a ls1 6 speed flywheel for sale?
i need to redo my clutch and need to get one resurfaced but dont wanna wait.
please lemme know
also, is there a difference between the auto, and 6 speed flywheels?
or lt1 and ls1 flywheels?
i need to redo my clutch and need to get one resurfaced but dont wanna wait.
please lemme know
also, is there a difference between the auto, and 6 speed flywheels?
or lt1 and ls1 flywheels?