Official Polk County thread!
Modded LT1 i wish....The motor is stock with 178000 hell ive never changed the plugs or wires yet sence ive had it for 4 years now.The tranny has been rebuilt with a cheap 25/2800 FTC stall and 3.42 gears with a LPW cover and deflection braces,and weld on relocation brackets and cheap LCA's.It dynoed 264/283 at the wheel 3 years ago.It's still set up for 3.73 gears so modded i wish
I got murdered by a lil red racecar thing that ran 6.25 that pass
I had fun, wasn't expecting much on bald street tires and no tune. I'm thinking about picking up a set of Toyo Proxes TQ DR's anybody use these?
Teching In
Joined: Aug 2010
Posts: 36
Likes: 1
From: Lakeland.FL
60-1.92 1.98
330 5.62 5.45
660 8.73 8.27
mph 77.35 87.15
That was a good race.Had a blast with every one
My best pass was 8.258 @ 87.38mph 1.98 60' My best 60' was a 1.95 but that ET was 8.27.
I got murdered by a lil red racecar thing that ran 6.25 that pass
I had fun, wasn't expecting much on bald street tires and no tune. I'm thinking about picking up a set of Toyo Proxes TQ DR's anybody use these?
I got murdered by a lil red racecar thing that ran 6.25 that pass
I had fun, wasn't expecting much on bald street tires and no tune. I'm thinking about picking up a set of Toyo Proxes TQ DR's anybody use these?
Very good radial and last a long time.
I'm only giving you a hard time! My car is nothing special either maybe a little faster than yours. Bring some other cars with you next time you make it to lakeland. You’re from the Orlando area correct? We need a few more fast street cars over here.
What mods do you have?
Side note, it seems like everytime I drive my "slow" car I get chances to race, but when I'm in my camaro (less slow car) everyone shys away. Its not that intimidating...it has a single exhaust tip so that makes it slow right
Example: this morning I drove my wife's 13' Altima to work to save gas since she's out of town and I had two mustang 5.0's rev at me trying to race at a stoplight....WTF? whenever I line up against one in the camaro they won't even look over at me....
The taller 255/50r16 might mess with my ABS if i leave the shorter 245/50's on the front. IDK
Next project: remove ABS & trac-control!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Kevin only difference in mods in our cars is the lid. didn't realize it made that much difference. my 8.35 @ 85 pass was on a 1.92 60' so you are flat outrunning me. I'm still on stock lid, silencer box and all haha
What gears do you have? I have stock 3:23's I would've expected you to trap higher with the M6 compared to my A4.
Unfortunatly I'm not guna make it out Friday for test n tune, I'm getting dragged to a christmas party.
I'll have my SLP lid and smooth bellow for sale soon.
^ may have to hit you up on those
my car is full weight, full options, and stock 3.42 gears on 275/40/17 nitto drag radials. it's weird when my car was stock it would trap 87-88 mph, but only run 8.75's. kinda weird
my car is full weight, full options, and stock 3.42 gears on 275/40/17 nitto drag radials. it's weird when my car was stock it would trap 87-88 mph, but only run 8.75's. kinda weird
I've stock internals, so it will be detuned alot. Thinking about lowering my limiter again. We'll see how it goes on the dyno. Just looking for 600 and not making any repairs for awhile.
.....and if that doesn't help, I may have a NX MAF kit for sale. Already set up with a 150 shot! It's got everything you need(purge, bottle heater, extra jets, nitrous filter, safety stuff and switch panel). Thought about turning it into a intercooler sprayer : )
I am thinking about trading in my 06-jeep, 02-Z28 and my 95-Bronco on a 13-ZL1. The only thing I owe anything on is the Jeep and well they would just have to make it go away. I dont think there is any equity in the jeep yet being I just bought it about 6-7 months ago.
Or just selling the camaro and bronco outright to put down some good cash.
What do you guys think?
Or just selling the camaro and bronco outright to put down some good cash.
What do you guys think?