My "mini" build thread
#41
I am going to be ordering my MWCP 9 at the end of next month. I just need to save a little extra money to get new wheels and tires at the same time.
I am sorry to beat a dead horse, but you have the worst looking under carriage I've ever seen. With the lift I'd spray a **** ton of degreaser, let it sit, and then blast it with a pressure washer. I'd do that until it comes clean. Possibly hit it with an orbit sander to get the rest off. Spray it with rattle can primer or your gun and paint it. With all of those nice parts you are putting under there you should be proud to show them off without people constantly asking you about why your car is so dirty.
I am sorry to beat a dead horse, but you have the worst looking under carriage I've ever seen. With the lift I'd spray a **** ton of degreaser, let it sit, and then blast it with a pressure washer. I'd do that until it comes clean. Possibly hit it with an orbit sander to get the rest off. Spray it with rattle can primer or your gun and paint it. With all of those nice parts you are putting under there you should be proud to show them off without people constantly asking you about why your car is so dirty.
#42
#43
Just an update. Went to the "pony wars" event in Valdosta this past weekend. Rand a best of 12.5@112mph, and a best mph of 113 earlier in the day. But, It seems the m/t's and the new rear end were too much for the driveshaft. I did this with a 5000 rpm launch.
#49
I am going to be ordering my MWCP 9 at the end of next month. I just need to save a little extra money to get new wheels and tires at the same time.
I am sorry to beat a dead horse, but you have the worst looking under carriage I've ever seen. With the lift I'd spray a **** ton of degreaser, let it sit, and then blast it with a pressure washer. I'd do that until it comes clean. Possibly hit it with an orbit sander to get the rest off. Spray it with rattle can primer or your gun and paint it. With all of those nice parts you are putting under there you should be proud to show them off without people constantly asking you about why your car is so dirty.
I am sorry to beat a dead horse, but you have the worst looking under carriage I've ever seen. With the lift I'd spray a **** ton of degreaser, let it sit, and then blast it with a pressure washer. I'd do that until it comes clean. Possibly hit it with an orbit sander to get the rest off. Spray it with rattle can primer or your gun and paint it. With all of those nice parts you are putting under there you should be proud to show them off without people constantly asking you about why your car is so dirty.
#50
Random update. Got the PST driveshaft in and runs great. Just waiting for some time away from class and T&T in Gville to open up to hit the track again. Looks like the 24th will be my best bet. And here are some vids before I broke the driveshaft at Valdosta. I'm in the 2nd half of the last vid, that's my buddy's GTO running before that.
http://www.youtube.com/watch?v=CvkGSndG3ns
http://www.youtube.com/watch?v=rIyLXirpRnQ
http://www.youtube.com/watch?v=cSmvXn0f9rA
http://www.youtube.com/watch?v=_5q_VP4jls8
http://www.youtube.com/watch?v=CvkGSndG3ns
http://www.youtube.com/watch?v=rIyLXirpRnQ
http://www.youtube.com/watch?v=cSmvXn0f9rA
http://www.youtube.com/watch?v=_5q_VP4jls8