Tampa/St pete T56 builder?
09-12-2014, 12:16 PM
#2
11 Second Club
iTrader: (11)
Join Date: Aug 2005
Location: St. Petersburg, FL
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
I could do it I'm in st Pete if you could pull the tranny, around $1200 if it's not too badly damaged. New 1-2 slider, 2-3 slider, carbon fiber syncros, bronze fork pads , and billet 1-6 keys. Gets expensive if you need gears, main shaft or input shaft.
09-15-2014, 05:33 PM
#4
11 Second Club
iTrader: (11)
Join Date: Aug 2005
Location: St. Petersburg, FL
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
It will be solid, Tick charges extra for everything, they charge extra for 1-2 slider, 3-4 slider and only include billet keys on 1 slider I put them in for all 3 sliders in forward gears and shim to spec.
So a 999 rebuild quickly adds up to $1500 rebuild, I just replace all that stuff from the start cause most of Trannys need it.
Ticks master is the bomb! I'd replace that since you are rebuilding.
So a 999 rebuild quickly adds up to $1500 rebuild, I just replace all that stuff from the start cause most of Trannys need it.
Ticks master is the bomb! I'd replace that since you are rebuilding.
Last edited by Pharcyde50; 09-15-2014 at 05:40 PM.