car in the shop for the build!
Banned
Joined: Oct 2008
Posts: 393
Likes: 0
on a side note, we are both using the same
sized turbo. what do you think max hp/psi
can be had off a t67? mine is a dd set up
with stock ls2 and m6. i just wanted to
get a clear view for future upgrade sake.
hence the reason i've been following this thread.
sized turbo. what do you think max hp/psi
can be had off a t67? mine is a dd set up
with stock ls2 and m6. i just wanted to
get a clear view for future upgrade sake.
hence the reason i've been following this thread.
With the temps outside getting cold the car made 550 rwhp and 630 ft lbs. For the first time the car spun at the top of building boost. I'm sure it would have made alittle more torque without spinning.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I like this setup. It seems like it would have less problems than the APS kit I was looking at.
Great numbers. I think this kit would interest a lot of people. Is it made of stainless or mild steel?
Are under hood temps a problem or is everything getting coated?
I just saw your live in Louisville. You are about 1.5 hours from me.
Great numbers. I think this kit would interest a lot of people. Is it made of stainless or mild steel?
Are under hood temps a problem or is everything getting coated?
I just saw your live in Louisville. You are about 1.5 hours from me.
Typically I would reccomend a coated mild steel for the hotparts and aluminum for the cold side. Currently the underhood temps are not a problem at all even being uncoated, but the weather here had been 50* and below.
I can't believe you threw a 6-speed in it. Actually, I can. I wonder if it would have differed had it been higher numbers. Maybe it only makes 5 or 10 more at the 500hp level but 30 or 40 at the 800hp level. Good **** either way.
The car is doing fine, got the automatic back in it. We have a track rental the 6th of December pending weather, hopefully we can get one good pass before transmission explosion. The turbo is a .96 a/r. I am going to try and get some video and sound of the car up also.
Last edited by black98ws6ta; Nov 26, 2008 at 04:09 PM.
Banned
Joined: Oct 2008
Posts: 393
Likes: 0
i'm running an .96 AR. too...but i'm thinking a .81 may have to replace it
for faster spooling....we'll see how the .96 works...
thanks for the reply.
and yah!...pix and vids anytime now?! lol
don't fall asleep on us guys who love the "one off" threads.
for faster spooling....we'll see how the .96 works...
thanks for the reply.
and yah!...pix and vids anytime now?! lol
don't fall asleep on us guys who love the "one off" threads.
