I am wanting to get my car tuned on 10 psi to start with. How could I use my 5psi actuators to achieve 10 psi without a boost controller? I also have 12-14 actautors and 15 psi.


Thanks

 

You can use a forge motersport actuator Part # FMUNOS for about $100.From what they told me ,,,with 10 PSI springs which are currently in my APS, I can tune up to 20PSI and down to the stock 10 PSI if i wish. Thats why i bought it .For more tunability

 

Thanks. Is there anyway to do it with the Incon Actuators?

 

when i had the small turbos...4.5 or 5 psi actuators (i forget) i ran mine with NO hoses on the wastegates. that got me 12psi............................................. ..........

 

You can also buy new actuators from Forge Motersport, which is what i did when i had my Incon. I just sent mine in to them !One of mine was leaking anyways LOL!!

 

These are also the GT3076r if that helps

 

21 psi and let em eat!!!!

 

Michael I have some 5# springs for the tial gate send me a pic of your gate I'll see if they will work.

 

Whats your email address Doug?

 

What do you think about break in? Just throw it on the dyno with 15-20 psi? I have driven it a little but havent gotten into boost because of tune.

 

madcoinc@comcast.net

 

I found mine. Thanks though. TTT I need to know how far to adjust the 5 psi actuators to get 10lbs.

 

There is really not any set adjustment for 10#s, You just need to start w/ the lightest setting and work your way up from there.

 

let scott tune it for 15 and be done.

 

I was thinking 15 and then ***** up and do 20...

 

I don't think you will see 20psi or more on the incons. 14.5-15psi and spikes. But not a solid pull to 20psi.

 

i saw 20 on the bigger incons and thats where they were done.

 

wooooooooooooooooooooooooooooooooooo wooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oo



fukjcing right hold 'er to teh flooooor

 

At Intune?

 

Ye dam rite!!!