*** I DID IT !! Smashed the 8-second Zone today ***
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mission accomplished !
8.87 at 155Mph .
I got in on a last minute rental today and after 2 weeks of sh*t weather here in the Northeast , I was salivating at the chance to race today , everything fell into place , just like I needed it to .
The track was good , not great , and took some time to figure out , I had some promising runs in the beginning of the day , tried a few new things , had some traction problems and was under the gun by the end of the day , the rental closes at 430pm , it was 415pm and I still didn't have that 8-second slip , all day I kept leaving with less boost 2-3lbs and playing with tire pressures and finally ran ran a 9.08 at 156 , almost there , pulled a 1.47 60ft , I came back around , let the car cool down about 5 minutes and pulled in to the burnout box at 427pm , did a short burnout and staged , I got to the line and said f*ck it ! I knew I had to come out harder but wasn't sure if the track would hold because it wasn't earlier on , I came up on the transbrake saw 5lbs and let it rip , I honestly knew it was an 8-second pass by about the 1000ft mark , the car was dancing around and pulling harder than it ever has , no way I was lifting , I hit the rev limiter right at the finish line . As Julio gave me the slip he told me it was a 9.01 , I was still happy , when I read it and it said 8.87 I almost jumped through the roof .![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
I finally got my 3700+lb pig in the 8's and I did it like I wanted to on the same wheels and tires I drive on every day , the car was driven to and from the track ( 145 miles round trip ) on my radials .
Here's a breakdown of the slip .
60ft-1.373
1/8th-5.744
1/8th MpH-125.00
1/4-8.874
Mph-155.29
And there's more in it , no boost controller , I'm running off the spring in my Tial-60 wastegate , the largest spring combo is 15lbs , I'm running a 14lbs spring , car is making 18lbs of boost . When I get the right boost controller I should be able to run another 3-4lbs of boost .
I'm very impressed with my Cartek 402 , the motor is a mild combo , no exotic parts , I was dead broke when I had Cartek build it , so it was a budget build .
Stock bore LS-2 block ,
Cartek Turbo Grind Hydraulic-roller cam , stock rocker arms .
Stock LS-6 Intake manifold , stock ported throttle body .
ETP 255 LS-1 Heads with stock Z-06 Exhaust manifolds .
I wonder what it would run with some 6-bolt LS-7 style heads and intake and a solid-roller ??
Huge props to the whole Cartek crew for all you've done for me over the last 8 years , I never could have done this with out you guys .
.
On to the driveline ,
my RPM Built 4L80E Trans is a f*cking beast ! I hot lapped the car a few times today and it never skipped a beat , you guys are the kings of the C5/C6 driveline world
I've got some thinking to do over the winter , I may turn it up a notch , or I may just de-tune and enjoy it like I did most of this year . I achieved my goal of running 8's in a true street driven IRS A4 transmission C5 , now I will have to set a new goal .
The timeslip and video will be up shortly .
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
I got in on a last minute rental today and after 2 weeks of sh*t weather here in the Northeast , I was salivating at the chance to race today , everything fell into place , just like I needed it to .
The track was good , not great , and took some time to figure out , I had some promising runs in the beginning of the day , tried a few new things , had some traction problems and was under the gun by the end of the day , the rental closes at 430pm , it was 415pm and I still didn't have that 8-second slip , all day I kept leaving with less boost 2-3lbs and playing with tire pressures and finally ran ran a 9.08 at 156 , almost there , pulled a 1.47 60ft , I came back around , let the car cool down about 5 minutes and pulled in to the burnout box at 427pm , did a short burnout and staged , I got to the line and said f*ck it ! I knew I had to come out harder but wasn't sure if the track would hold because it wasn't earlier on , I came up on the transbrake saw 5lbs and let it rip , I honestly knew it was an 8-second pass by about the 1000ft mark , the car was dancing around and pulling harder than it ever has , no way I was lifting , I hit the rev limiter right at the finish line . As Julio gave me the slip he told me it was a 9.01 , I was still happy , when I read it and it said 8.87 I almost jumped through the roof .
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
I finally got my 3700+lb pig in the 8's and I did it like I wanted to on the same wheels and tires I drive on every day , the car was driven to and from the track ( 145 miles round trip ) on my radials .
Here's a breakdown of the slip .
60ft-1.373
1/8th-5.744
1/8th MpH-125.00
1/4-8.874
Mph-155.29
And there's more in it , no boost controller , I'm running off the spring in my Tial-60 wastegate , the largest spring combo is 15lbs , I'm running a 14lbs spring , car is making 18lbs of boost . When I get the right boost controller I should be able to run another 3-4lbs of boost .
I'm very impressed with my Cartek 402 , the motor is a mild combo , no exotic parts , I was dead broke when I had Cartek build it , so it was a budget build .
Stock bore LS-2 block ,
Cartek Turbo Grind Hydraulic-roller cam , stock rocker arms .
Stock LS-6 Intake manifold , stock ported throttle body .
ETP 255 LS-1 Heads with stock Z-06 Exhaust manifolds .
I wonder what it would run with some 6-bolt LS-7 style heads and intake and a solid-roller ??
Huge props to the whole Cartek crew for all you've done for me over the last 8 years , I never could have done this with out you guys .
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
On to the driveline ,
my RPM Built 4L80E Trans is a f*cking beast ! I hot lapped the car a few times today and it never skipped a beat , you guys are the kings of the C5/C6 driveline world
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
I've got some thinking to do over the winter , I may turn it up a notch , or I may just de-tune and enjoy it like I did most of this year . I achieved my goal of running 8's in a true street driven IRS A4 transmission C5 , now I will have to set a new goal .
The timeslip and video will be up shortly .
Last edited by STEALTH TURBO C5; 11-18-2008 at 11:17 PM.
Trending Topics
#12
#13
#15
TECH Fanatic
iTrader: (2)
Join Date: Apr 2008
Location: Born/Raised North East, MD Lived in VA, NC, MI Back in Yorktown, Va
Posts: 1,169
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
wow congrats man. this is pathetic and im hoping to hit 12.5 and quicker before the year is out. hahahaha i feel like a pansy right now. well im gonna go back to my LT1 page and leave you fast guys alone. hahaa congrats again man
#16
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's the video ,
http://www.cartek.net/videos/stealth887.wmv
I need to trim my exhaust wrap , I scraped it on the way over to the track today , that's what you see hanging below the car .
http://www.cartek.net/videos/stealth887.wmv
I need to trim my exhaust wrap , I scraped it on the way over to the track today , that's what you see hanging below the car .
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats Mike. Awesome driving. ![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Here are the videos.
Julio
http://www.cartek.net/videos/stealth887.wmv
http://www.cartek.net/videos/stealth908.wmv
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Here are the videos.
Julio
http://www.cartek.net/videos/stealth887.wmv
http://www.cartek.net/videos/stealth908.wmv