GT47-88 L92 first dyno results!!!!!
#1
8 Second Club
Thread Starter
iTrader: (40)
Join Date: Aug 2005
Location: Raleigh,North Carolina
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
GT47-88 L92 first dyno results!!!!! Video added!!!!!
Well got it on the dyno today. We were just looking to baseline it and start to get the tune hammered out, it definitely exceeded my expectation for the first round of dyno time.
This was on 10 gallons of 93 oct. with 6 gallons of 118 mixed in for a little extra insurance.
Boost was steady at 13.8 psi, timing was set at 12*, TH400 with a not so turbo optimal 4000 rpm stall.
Big thanks to LCVette for turbo tuning expertise among other things, and the guys at National Speed that stayed a little longer to let us get a little tuning in.
Here is the best pull....
Video....http://videos.streetfire.net/video/8...-Am_205818.htm
This was on 10 gallons of 93 oct. with 6 gallons of 118 mixed in for a little extra insurance.
Boost was steady at 13.8 psi, timing was set at 12*, TH400 with a not so turbo optimal 4000 rpm stall.
Big thanks to LCVette for turbo tuning expertise among other things, and the guys at National Speed that stayed a little longer to let us get a little tuning in.
Here is the best pull....
Video....http://videos.streetfire.net/video/8...-Am_205818.htm
Last edited by veee8; 12-15-2008 at 10:06 PM.
#4
8 Second Club
Thread Starter
iTrader: (40)
Join Date: Aug 2005
Location: Raleigh,North Carolina
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
This thing has zero traction with the Pirelli P-zero 295-35-18 tires. Drag radials are needed before any kind of street pulls will happen.
We parked the truck and trailer a couple of miles from the dyno, as soon as it comes on ANY boost it is dancing.
We parked the truck and trailer a couple of miles from the dyno, as soon as it comes on ANY boost it is dancing.
Trending Topics
#11
11 Second Club
iTrader: (24)
Killer job Juicy!! I can't wait to see what 18lbs of boost will do. You got Sam wanting to put 300-500HP worth of NX on the 582 to stay on top, LOL!! The 70" of snow is rapidly melting today @ 40* outside. It was a bitch trying to ride thru 3' of slop last night. The deep freeze will be here on Monday, so the hardpack will set in. Can't wait til spring to get my turd on the dyno for the NX runs. I don't think I'll match the 830HP, tho. Keep us posted!
#14
8 Second Club
Thread Starter
iTrader: (40)
Join Date: Aug 2005
Location: Raleigh,North Carolina
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
These runs would flash up there in a second or 2, it comes on hard and fast. The TH400 and loose converter makes it real tough to dyno this thing.
There was a pile of rubber behind the rollers, these tires suck! I am sure that didn't help.
#19
Launching!
iTrader: (3)
Join Date: Feb 2002
Location: Wilmington, NC
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the thanks Chris!
we have alot of work left to do on the tune! we will schedule some time to really get it ironed out after we do some adjusting on the maps for some better resolution in the desired areas.
you definately need some better rubber under that thing.. and no it doesn't take 2-3 seconds to spool, this thing is lightening fast on spool I would have had a hard time believing it was a GT4788 if I hadn't seen it under the hood. boost seems about linear with the gas pedal, very impressive response. will be even better with some tires that can load the car a little more. from the passenger seat and stepping out of my manual car this one within a 30 minute window gave a very good comparison. Chris's car is a little more violent then mine with the loose converter.. mine you have a split second to anticipate the spool and feel the rush where as his goes fromidling along at cruise to 7k RPM and peak boost in no time flat.. very nice response indeed!
can't wait until we get you all drunked up on the E85 like me.. then we can really have some fun!
Chris
congratulations and looking forward to some more fun!
Chris
we have alot of work left to do on the tune! we will schedule some time to really get it ironed out after we do some adjusting on the maps for some better resolution in the desired areas.
you definately need some better rubber under that thing.. and no it doesn't take 2-3 seconds to spool, this thing is lightening fast on spool I would have had a hard time believing it was a GT4788 if I hadn't seen it under the hood. boost seems about linear with the gas pedal, very impressive response. will be even better with some tires that can load the car a little more. from the passenger seat and stepping out of my manual car this one within a 30 minute window gave a very good comparison. Chris's car is a little more violent then mine with the loose converter.. mine you have a split second to anticipate the spool and feel the rush where as his goes fromidling along at cruise to 7k RPM and peak boost in no time flat.. very nice response indeed!
can't wait until we get you all drunked up on the E85 like me.. then we can really have some fun!
Chris
congratulations and looking forward to some more fun!
Chris
#20
8 Second Club
Thread Starter
iTrader: (40)
Join Date: Aug 2005
Location: Raleigh,North Carolina
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Man I was nervous wreck, and you helped me through it! Some drag radials will go a long way compared to those Pirellis. A final burnout sendoff may be in order for those turds!
We need to find out if anyone got any video or pics.
We need to find out if anyone got any video or pics.