shawn_c992001

Or possibly 2 nozzles one in the front and one in the back. The first one could spray through the throttle blade for the first few cylinders, and the rear could be for the back cylinders. I could really see an improvement for the 7 & 8 cylinders getting more meth, possibly even using a smaller meth jet.

BigRich954RR

iTrader: (1)

Very bad idea. No way to tune it right.. You want all the meth to turn into vapor before the tb. So its a even a/f mix of meth. If 7/8 cylinder get packed with more air with FI . Then they will aslo be getting more meth mixed in too with it spray before tb blade.

JoshuaGrooms83

iTrader: (2)

lol i think someone was playing with this idea on my LS6 intake before i got it. i have 8 identical 1/8 sized holes with slots on the out sided of my manifold that are in close proxsimidy of where someone would place extra nozzles lol but too small for nos injectors. that that was interesting.

anyway, anything new on this one?

Somebody09

why too small? nitrous nozzles come in 1/8" NPT and 1/16" NPT from what i've seen