injectors
injectors Posting this in fuel and SC section since it involves blower
What injectors would I need for a H/C A4 C5 with all the bolt ons making 414rwhp (with TC unlocked) if I add a P1SC-1 at 6psi (hopefully 550rwhp)
What injectors would I need for a H/C A4 C5 with all the bolt ons making 414rwhp (with TC unlocked) if I add a P1SC-1 at 6psi (hopefully 550rwhp)
You would likely be at or near MAX on some 42lbers, and 60's are the most common next step. Its not like you can find some 50lbers for wayyyy cheaper. Plus fuel is the first area you WANT to have some breathing room in.
I also agree with 60lb injectors. 42lb injectors would handle 550 NA rwhp just fine. But in FI setups, the pressure in the intake manifold will be working against the injector and making it not as efficient. 60lb injectors will also give you some room to grow if you want to switch out to a D1SC head unit or spin the **** out of the P1SC
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo They might as well be able to do that, but that just sounds too risky for myself. For my own piece of mind I would not risk a $10K motor on a set of injectors that save $200 or $300.
Ran great with minimal tuning. Posted as info by vendor (Not stirring a pot, just trying to verify quality)
"Originally Posted by XtremeMotorsports
I would like to thank you and Jon for helping me figure out this issue.
I would also like to publicly endorse this company and their ability to do outstanding work.
In addition to these injectors I also sent them a set of stock LS3 injectors and had them re-flowed to 60LBS/HR, not only were they professional I had the injectors back within 3 days from the day I dropped them off.
I installed them in a 2008 Corvette we did with a Pro Charger,Melrose Long Tubes,Random cats and X-Pipe,with a magnaflow Cat Back. I have to say this was the easiest car I have ever had to tune. I made 3 pulls and I was done !! The car drove like it was stock again.
If anyone needs any injectors, I strongly suggest you use the Fuel Injector Connection. Thanks again guys !!"
"Originally Posted by XtremeMotorsports
I would like to thank you and Jon for helping me figure out this issue.
I would also like to publicly endorse this company and their ability to do outstanding work.
In addition to these injectors I also sent them a set of stock LS3 injectors and had them re-flowed to 60LBS/HR, not only were they professional I had the injectors back within 3 days from the day I dropped them off.
I installed them in a 2008 Corvette we did with a Pro Charger,Melrose Long Tubes,Random cats and X-Pipe,with a magnaflow Cat Back. I have to say this was the easiest car I have ever had to tune. I made 3 pulls and I was done !! The car drove like it was stock again.
If anyone needs any injectors, I strongly suggest you use the Fuel Injector Connection. Thanks again guys !!"