Forced Induction Superchargers | Turbochargers | Intercoolers

turbo spool vs AFR & Timing

Thread Tools
 
Search this Thread
 
Old 02-22-2009, 12:15 PM
  #21  
9 Second Club
iTrader: (37)
 
cablebandit's Avatar
 
Join Date: Nov 2001
Location: Cleveland, OH
Posts: 7,903
Likes: 0
Received 1 Like on 1 Post

Default

3200-3300rpms
Old 02-23-2009, 10:08 PM
  #22  
8 Second Club
 
pmbmax's Avatar
 
Join Date: May 2004
Location: Savannah, TN
Posts: 371
Received 0 Likes on 0 Posts

Default

Originally Posted by crashly
it has 3 rd rpm limiter, than can be controlled by electrical signal , to help spool the turbo before you go into full stage, AND will not activate the trans break , and stop the car from rolling into full stage...

go to msd web site amd down load the instructions...
Most people hook the 1st wire up to the foot brake. so bring it up to that limit prestage with foot brake and trans brake it goes to the second rev limit.(bump it on the t brake) pick your foot up and it goes to a third limit that will be the rpm you leave on . then it default to the high rev limit. Works good also if you are below your set point your shift light will be off when you are on the rpm it stays lit up and if you go over it will flash . This is one bad *** box .



Quick Reply: turbo spool vs AFR & Timing



All times are GMT -5. The time now is 06:21 AM.