Making meth??
Thread Starter
TECH Enthusiast
iTrader: (9)
Joined: Oct 2005
Posts: 702
Likes: 0
From: Greenville, Raleigh NC
Making meth?? I searched and couldn't find anything, Im getting the car ready for a tune and going to go with meth injection just wondering what ppl are using for meth, is everyone just running M1 or are ppl mixing there own, I know a lot of import guys that use Heet and Denatured alcohol mix. Any ideas for good safe meth mix?
Last edited by Super Slow SS; Mar 23, 2009 at 09:57 PM.
Thread Starter
TECH Enthusiast
iTrader: (9)
Joined: Oct 2005
Posts: 702
Likes: 0
From: Greenville, Raleigh NC
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
You can buy a 55 gal drum of methanol for $118 from an oil distributor, then mix it 50/50 with distilled water and you have an inexpensive supply.
Also mix it 30% methanol 70% tap water and a few drops of blue food coloring and you have inexpensive washer fluid.
Best bet is find a few local enthusiasts and go in together on a barrel.
Also mix it 30% methanol 70% tap water and a few drops of blue food coloring and you have inexpensive washer fluid.
Best bet is find a few local enthusiasts and go in together on a barrel.
You can buy a 55 gal drum of methanol for $118 from an oil distributor, then mix it 50/50 with distilled water and you have an inexpensive supply.
Also mix it 30% methanol 70% tap water and a few drops of blue food coloring and you have inexpensive washer fluid.
Best bet is find a few local enthusiasts and go in together on a barrel.
Also mix it 30% methanol 70% tap water and a few drops of blue food coloring and you have inexpensive washer fluid.
Best bet is find a few local enthusiasts and go in together on a barrel.
I purchase 1 gallon of the blue WWF and 2 bottles of Heet. Mixed together, you get a 50/50 mix of methanol, which is the same as the Snow fluid. Cost, ~$6 per gallon, versus the Snow fluid which is now about $8 per gallon, plus shipping, to me.
Thread Starter
TECH Enthusiast
iTrader: (9)
Joined: Oct 2005
Posts: 702
Likes: 0
From: Greenville, Raleigh NC
Heet at the local wal-mart is about 1.60/gallon and distilled water is about $1.20, so I think i'll be using this method. $1.40 per gallon =] Ohh, and what nozzle are ya'll using, I got a SMC kit adjustable for boost and %/# of boost but I dont know what size nozzle to use and exactly where is best to put it. Keep the ideas coming though.
Thread Starter
TECH Enthusiast
iTrader: (9)
Joined: Oct 2005
Posts: 702
Likes: 0
From: Greenville, Raleigh NC
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
I use 100% meth with my alkycontrol kit. I buy it from a local speed shop. Bring in my own 5 gallon container and they fill it up. It costs roughly the same price as super unleaded gasoline does around here.
I almost bought a 55 gallon drum from a local oil company, but found out thats a horrible idea! If your house burns down and they find a 55 gallon drum of methanol in your garage, your insurance aint gonna pay jack **** most likely. Its not worth the risk of storing such a container dude.
I almost bought a 55 gallon drum from a local oil company, but found out thats a horrible idea! If your house burns down and they find a 55 gallon drum of methanol in your garage, your insurance aint gonna pay jack **** most likely. Its not worth the risk of storing such a container dude.
Thread Starter
TECH Enthusiast
iTrader: (9)
Joined: Oct 2005
Posts: 702
Likes: 0
From: Greenville, Raleigh NC
Ive heard of problems with washer fluid alone clogging up jets and stuff. Idk if its true but it stands to reason its not real good for your internals, just look at the holding tank when its empty, it always has some kind of residue on it