Turbo Tech kit
I would stick with a F1 procharger with ur future setup. The T-60 wont be enough for a forged 370CID with low C/R. The T-78 will make some serious power, but i just saw one car soo far doing over 500rwhp with their kit. F1 with 12-15psi and 8.5C/R 370CID u will be between 600-700rwhp. Good luck.
you should be able to push out a little under 500rwhp with the t60 kit
not sure how much the t76 upgrade costs
i know detroit speed works carries the kit you can also get it directly from turbotech, they would know pricing.
not sure how much the t76 upgrade costs
i know detroit speed works carries the kit you can also get it directly from turbotech, they would know pricing.
Thread Starter
Banned
Joined: Nov 2001
Posts: 448
Likes: 0
From: South Jersey
Well thanks for the info. but i sent in my P1SC for the D1SC upgrade 
I know that blower can handle my setup. But I weighed the options and decided to stick with stock cubic inches. And put the money in other things. Put the D1SC is this gonna be the better blower from wat I've seen even with stock cubes. Forged bottom end , ported 6.0 heads, and blower with the D1SC it should still fly
I know that blower can handle my setup. But I weighed the options and decided to stick with stock cubic inches. And put the money in other things. Put the D1SC is this gonna be the better blower from wat I've seen even with stock cubes. Forged bottom end , ported 6.0 heads, and blower with the D1SC it should still fly 
