Best Internals???
#2
On The Tree
iTrader: (4)
Join Date: Nov 2006
Location: OKC
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Really depends on the $ you want to spend.
Guys have made BIG power on the compstar rods, Diamond pistons, stock crank
REALLY BIG power usually requires something like Oliver billet rods, Wiseco (Turbo) pistons, and a crank like (Sonny Bryant, Callies magnum XL, Callies Dragonslayer)
Guys have made BIG power on the compstar rods, Diamond pistons, stock crank
REALLY BIG power usually requires something like Oliver billet rods, Wiseco (Turbo) pistons, and a crank like (Sonny Bryant, Callies magnum XL, Callies Dragonslayer)
#7
On The Tree
iTrader: (4)
Join Date: Nov 2006
Location: OKC
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I would say ehhhhh on the scat stuff.... Atleast go with the compstars w ARP2000 bolts. Those are the cheapest rods I would go with for 900+
The Lunati Pro-billet are nice.
The GRP aluminum's that are in Fireball's BAD *** Virginia speed motor are only good for so many runs as I understand it. All the 1500rwhp and up guys usually use the Aluminum ones
The Lunati Pro-billet are nice.
The GRP aluminum's that are in Fireball's BAD *** Virginia speed motor are only good for so many runs as I understand it. All the 1500rwhp and up guys usually use the Aluminum ones
Trending Topics
#8
FormerVendor
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
for 1000 hp engines i usually run the compstar crank and rods,they really work good with no issues.If it's going to be a high rpm engine i'll run the callies dragonslayer crank with the compstar hd rods or the lunati billet rods
#13
Excuse me if i am wrong but the Callies Magnum XL CrankShaft, i though that was for N/A motors because of it's weight and design.
Good internals for 1000hp IMO would be:
Compstar/Dragonslayer Crank
Callies H beam Rods
Diamond/JE/Wiseco Pistons
But i have heard of guys pushing thoes parts ALOT farther!
Also, if you are doing a budget build try using the factory crankshaft. If you are doing a budget build you might want to look in "The Real Price of FI"
Goodluck.
Good internals for 1000hp IMO would be:
Compstar/Dragonslayer Crank
Callies H beam Rods
Diamond/JE/Wiseco Pistons
But i have heard of guys pushing thoes parts ALOT farther!
Also, if you are doing a budget build try using the factory crankshaft. If you are doing a budget build you might want to look in "The Real Price of FI"
Goodluck.
#17
On The Tree
iTrader: (13)
Join Date: Dec 2008
Location: NJ
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Pistons and rods that i have used for high hp/tq turbo setups is CROWER Rods and weisco pistons. Both brands worked great without a hicup. I am now going to try manleys new turbo piston with teflon coated skirts and manley rods. You already got the cranks listed/ I never used a forged crank so i will not chime in on that. Good luck with your build.
#20