APS Problem need help
APS Problem need help Ok i bought a kit for a good price. Turns out some parts were missing. ( only things I've found missing are.
the Heat sheilding ( all of it)
the lower air dam/diverter thing.
I've called APS and some woman said "email us" i emailed them they get no response what so ever. Is someone here a dealer. or am i at the mercy of a company that is going to be jerks. If so I don't want their equipment i'd rather have something i can get service on.
thanks
steve
the Heat sheilding ( all of it)
the lower air dam/diverter thing.
I've called APS and some woman said "email us" i emailed them they get no response what so ever. Is someone here a dealer. or am i at the mercy of a company that is going to be jerks. If so I don't want their equipment i'd rather have something i can get service on.
thanks
steve
man get rid of it take it from me. unless you can get the better turbos for it. i wish i could do it over again.
id go with a front mount single turbo or large CID engine
just my 2 cents
id go with a front mount single turbo or large CID engine
just my 2 cents
You need to email there sales department. They'll get back with you on that email. Just give them the part numbers and how many you want and if they have it, they sell it to you. Some parts for some reason there not getting anymore..
It wasnt a big deal at all !Theres a 6 or 8hr diffrence between us and them from the eastern US here ,You gotta call the operator and get the US to australia 2 number code before you dail the number to get threw and theyll take your order right over the phone!! I ordered beefyer inlet hoses and some new oil return lines and some stailless piping that i messed up trying to fix the sway bar issue LOL Any way i can no the Price before i order? in either dollars? i can convert.
as for calling i already called them. ( your country codes are in the phone book also) but it's on the aps website.
as for calling i already called them. ( your country codes are in the phone book also) but it's on the aps website.
Trending Topics
I don't know whats up, but APS website has been down for several days. Bob
Address Not Found
Firefox can't find the server at www.airpowersystems.com.
Address Not Found
Firefox can't find the server at www.airpowersystems.com.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Hmm could be changing site, could be out of business maybe try the phones.
As for heat shielding you can get the exhaust manifolds ceramic coated going to do mine next time have them off the car and the turbo exhaust housings as well. I don't like those razor sharp heat shields much. Starter heat shield well not sure what you can do there if its that one. Maybe that smaller msd starter won't need shielding if it can take high heat.
As for other pieces might have to fab things up. Thats a problem with buying used over new. New you get every nut and bolt but you pay more. Fortuneatly most stuff in the kit is generic,tial wastergates, etc but they do have some specific to them parts as well. Their exhaust manifolds,their piping,etc. So hoping they do stick around so person can get some spare parts if needed otherwise might have to buy another used kit just to have backup.Or go to other system down the road if a critical part broke that couldn't get replacment for. next time around likely go with more top mount type of setup.I want to see my turbos!
So be following this to see whats up.
As for heat shielding you can get the exhaust manifolds ceramic coated going to do mine next time have them off the car and the turbo exhaust housings as well. I don't like those razor sharp heat shields much. Starter heat shield well not sure what you can do there if its that one. Maybe that smaller msd starter won't need shielding if it can take high heat.
As for other pieces might have to fab things up. Thats a problem with buying used over new. New you get every nut and bolt but you pay more. Fortuneatly most stuff in the kit is generic,tial wastergates, etc but they do have some specific to them parts as well. Their exhaust manifolds,their piping,etc. So hoping they do stick around so person can get some spare parts if needed otherwise might have to buy another used kit just to have backup.Or go to other system down the road if a critical part broke that couldn't get replacment for. next time around likely go with more top mount type of setup.I want to see my turbos!
So be following this to see whats up.
Teching In
Joined: Apr 2007
Posts: 21
Likes: 0
From: sand- eeee- eggo
I am the guy who sold him the kit. It was never installed, i did take all the stuff out of the original boxes. I never moved it out of the garage. What baffles me is how things ended up missing, maybe they were never there to begin with or somebody just walked in my garage and snagged something. I have not gotten a response either, i would like him to have everything. Hopefully this is resolved soon, i will email you after this weekend is over Steve....or maybe i will give you a call to see what the gameplan is going to be.
But yes i notcied the website is down too.
But yes i notcied the website is down too.