Turbo kits that keep A/C???
basically it's a stock short block with arp head studs on 317 heads with patriot gold springs topping the top side. when i first boosted it it had 86k miles on the engine it now has 90k i run at 16 pounds with the tc76f1 turbo. the manifolds are facing normal as they would on a stock ls1 with the driver side going under the tranny/engine mating surfaces into a 3 inch merge on the passenger side. from there it goes under the compressor but above the bmr turbo kmember to the front of the engine where it meets up with the turbo.
it's a fun little setup, keeps the AC and everything in the stock location.
hope that helps, if you have any more questions hit me up. i'm currently selling it to a friend becuase i'm going with a bigger setup now and turning the car into a track car. it's been a fun project. i have more fun building it than racing it lol
it's a fun little setup, keeps the AC and everything in the stock location.
hope that helps, if you have any more questions hit me up. i'm currently selling it to a friend becuase i'm going with a bigger setup now and turning the car into a track car. it's been a fun project. i have more fun building it than racing it lol
^^^ be very careful turbo builds can get very unexpectedly expensive. trust me i know.
i like how the aps kit was designed. one day i might upgrade to it. but from what i hear is that their turbos are garbage for the f body's
i like how the aps kit was designed. one day i might upgrade to it. but from what i hear is that their turbos are garbage for the f body's
On The Tree
Joined: Apr 2006
Posts: 180
Likes: 0
From: Lancaster CA
i have had an STS kit on the car now for 2 and a half years, and i only wish i had dug deeper to realize how many front mount kits there are out there before i bought what i did, dont get me wrong the STS set up is a good quick, cheap and easy way into F.I. but i would love to upgrade. any one have any sugestions as to how much i could possibly sell my kit for? it still works good as new.
Banned
Joined: May 2009
Posts: 58
Likes: 0
From: H-O-U-S-T-O-N TX
I would keep the turbo,bov,and wastegate,sell the other parts and with that money buy the hot piping and down pipe from josh @ kytp. I think its like a grand for it. Correct me if I'm wrong people. Then you would just need odd and end litttle stuff.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo On The Tree
Joined: Apr 2006
Posts: 180
Likes: 0
From: Lancaster CA
i know this answer is prolly out there some were but how much power can a stock crank hold? ive heard only 500...but i read in onther post that the stock crank would be good for 6-700rwhp? im trying to narrow my possabilities..i have about a thousand ideas running through my head and i think im getting close..i can get my hands on a complete 6.0 truck motor for $400, wiring harness and all...what would be a good set of heads to run? ive read that the stock 346-370 c.i. is good for a steet/strip set up which is what im going for, im just wanting to get somethin going...
i know this answer is prolly out there some were but how much power can a stock crank hold? ive heard only 500...but i read in onther post that the stock crank would be good for 6-700rwhp? im trying to narrow my possabilities..i have about a thousand ideas running through my head and i think im getting close..i can get my hands on a complete 6.0 truck motor for $400, wiring harness and all...what would be a good set of heads to run? ive read that the stock 346-370 c.i. is good for a steet/strip set up which is what im going for, im just wanting to get somethin going...
On The Tree
Joined: Apr 2006
Posts: 180
Likes: 0
From: Lancaster CA
right on, umm, being that i recently ran a fastest of a 12.41@112.7 with a bone stock LS1 that has roughly 97k on it, i know a rear is in order, but were could i possibly see myself running if i add an LS6 intake, TB, FMIC, 76mm Turbo, and stiffer valve springs and stronger pushrods, and upping the boost?
right on, umm, being that i recently ran a fastest of a 12.41@112.7 with a bone stock LS1 that has roughly 97k on it, i know a rear is in order, but were could i possibly see myself running if i add an LS6 intake, TB, FMIC, 76mm Turbo, and stiffer valve springs and stronger pushrods, and upping the boost?
right on, umm, being that i recently ran a fastest of a 12.41@112.7 with a bone stock LS1 that has roughly 97k on it, i know a rear is in order, but were could i possibly see myself running if i add an LS6 intake, TB, FMIC, 76mm Turbo, and stiffer valve springs and stronger pushrods, and upping the boost?
What was your combo when you ran the 12.4?... The 450hp in your sig will take you a hell of alot faster than 12.4s...so I guess it was before that?...
Banned
Joined: May 2009
Posts: 58
Likes: 0
From: H-O-U-S-T-O-N TX
right on, umm, being that i recently ran a fastest of a 12.41@112.7 with a bone stock LS1 that has roughly 97k on it, i know a rear is in order, but were could i possibly see myself running if i add an LS6 intake, TB, FMIC, 76mm Turbo, and stiffer valve springs and stronger pushrods, and upping the boost?
On The Tree
Joined: Apr 2006
Posts: 180
Likes: 0
From: Lancaster CA
im just wanting to see a pass that puts me deep into the 11's. the 6.0 truck motor is going to be the serious build, but im just wanting to push the stocker to its limits...i know they say that 98 has the weakest rod bolts out of any LS1 and that they can barley manage 500 hp. well im already making 517 at the motor...so im gonna keep going till she blows...would an LS6 intake work for the build or should i go with the edlebrock?